[操作疑難] DS918+和RT-AC88U (Merlin firmware)的Port Forwarding

richardyu301

我在用Asus RT-AC88U路由器(Merlin firmware), 剛剛買了DS918+.   我在深圳用, 用中國電信100M, 電信modem已用Bridge Mode.

RT-AC88U是在DS918+的Compatibility List.  我嘗試在Control Panel->Connectivity->External Access->Router Configuration->Set up router, 譲DS918+自勳set port forwarding, 但是在"Checking network environment"這一項出了問題(其他都沒問題):

Warning: If all port forwarding rules failed, please check if there are two or more routers in your network.  In that case, please consult your Internet service provider to set the modem/router to Bridge Mode, or try setting your router to Bridge Mode.
Note: your UPnP router did not pass the compatibility test.  You can click Next and set up port forwarding rules manually on your router to allow DiskStation access from the Internet.

當我按Next去下頁Manual選擇Router, pull-down menu沒有AC-RT88U可以選擇, 但有RT-AC66U/RT-AC68U.

請問是出了什麼問題？

如果把firmware從Merlin改回default firmware可以解決這問題嗎？

willng911

老實講, 我自己動手set port forward. 5000 同 5001 一定唔出街. 自動set 果兩個ports 如果唔轉D高手就....

richardyu301

其實我不想自己Manual Set Port Forwarding, 想交給DSM auto-set.  照計AC88U在DS918+ Compatibility List, 應該可以auto-set.  但是不成功 用pull down menu選擇又找不到AC88U 不知道是不是因為Merlin firmware的原因