WDR7500 flash with OP and ArcherC7 firmware
本帖最後由 echen 於 2013-10-10 05:12 編輯
Here under the information for WDR7500 flash with OP or Archer C7 -
files - http://nosferatu.g0x.ru/pub/wdr7500/
Video - http://www.youtube.com/watch?v=Y5CdQT_PXXo
https://forum.openwrt.org/viewtopic.php?pid=213547#p213547
If you already flashed with 130820 CN firmware, you cannot use the above method because the u-boot may difference and cannot downgrade to lower level, you must use TTL and I had flashed successfully using this method, following the command and pictures -
Original CN firmware -
TTL wiring -
After flash -
Speedtest -
Command -
1. Setup the tftp server at pc with IP 192.168.1.100, put the firmware file at the same folder of tftp server,use lan cable from router lan port to tftp server.
2. Type "tpl" when see the "auto booting in 1 second" on the console. you will get ap135>
3. tftp 0x80060000 ????.bin (depend on what you want to flash, but file must cut the boot loader already and 8126464 bytes, if you want the English C7 firmware, use the ARCHERC7-V1_130729_up.bin)
4. erase 0x9f020000 +0x7c0000
5. cp.b 0x80060000 0x9f020000 0x7c0000
6. bootm 0x9f020000
Use at your own risk, many thanks for the original writer Ck-NoSFeRaTU at above link and provide very detail information. |
|
|
附件:
您需要登錄才可以下載或查看附件。沒有帳號?註冊