WD1002FAEX-00Y9A0 ~FIX PATCH SATA2>SATA3 方法

andyming

原文:
:http://community.wdc.com/t5/Desk ... I/td-p/42015/page/2

1. First format you usb key in fat..
Create an usb boot drive with a tool like unetbootin.

Choose FreeDos which is a free MS-DOS version which contains sata drivers.

2. Copy the file "WdSSpd.exe" on it.

3. Shutdown computer

4. Unplug sata3 cable and connect a standart sata cable.

Connect them to a sata2 controller on your motherboard.

5. In the bios, you need to define your sata controller in "enhanced" or "AHCI" mode, not "IDE"

6. Boot on the key, run "Live" mode.

My usb drive was B: so type "cd B:" to access it.

Run WdSSpd.exe and wait

7. Allright, you will see a message which indicate to reboot.

8. If you were in sata "IDE" mode, don't forget to reset it because windows will not boot

cs112

有無中文版,睇唔明=.=
早2個月我都買左00Y9A0,依家用你個方法可以轉番做sata3嗎?

forget

完全明白..多謝樓主

hold_find

打咗俾聯強
拎上去師傅會幫我做update

kenn

Yes.  Just brought the HDD to Synnex and the technician helped me to reset my HDD to run as SATA3.  BIOS detects it as a SATA3 HDD now.

dejiko

回復 4# hold_find


    我想問下, 個師傅update完隻野之後, 個firmware係唔係唔同左version?

dejiko

回復 1# andyming


    如果手動update, 個firmware version會唔會改左?
我都係00Y9A0, firmware version係01.01V01

kenn

I forget the version of the firmware before resetting.  Now its  version is 01.01V01.

gbaxp

隻HARDDISK到底有咩問題?

hold_find

回復  andyming


    如果手動update, 個firmware version會唔會改左?
我都係00Y9A0, firmware version係 ...
dejiko 發表於 2010-9-11 16:48

咁又唔清楚，我未做update