dickboy

**************************************************************
*BSOD 重要訊息:

0x101 = increase vcore (需增加Vcore)
0x124 = increase/decrease vcore or VCCIO/VTT...(視情況而定,增減vcore或是vtt)
0x0A = unstable RAM/IMC,一般是先增加VCCIO(vtt)不穩再增加vcore
0x1E = increase vcore or check Display driver /increase small of vccio voltage 
0x3B = increase vcore or vdimm
0x3D = increase vcore or lower the bclk(增加vcore或是減低bclk)
0xD1 = VCCIO問題, increase/decrease as necessary, 不穩再加vdimm
0x9C = 通常是VCCIO問題,但有時vcore加過頭也會
0x50 = 記憶體參數問題..通常是太緊,或是vdimm不夠
0x109 = vdimm不夠..或是加太多
0x116 = 通常出現在跑多卡時,在x58則是IOH不夠,在1155/1156則是VGPU問題
0x7E = OS corruped(OS系統檔亂掉). Run sfc /scannow and chkdsk /r*

dickboy

**************************************************************
*BSOD 重要訊息:

0x101 = increase vcore (需增加Vcore)
0x124 = increase/decrease vcore or VCCIO/VTT...(視情況而定,增減vcore或是vtt)
0x0A = unstable RAM/IMC,一般是先增加VCCIO(vtt)不穩再增加vcore
0x1E = increase vcore or check Display driver /increase small of vccio voltage 
0x3B = increase vcore or vdimm
0x3D = increase vcore or lower the bclk(增加vcore或是減低bclk)
0xD1 = VCCIO問題, increase/decrease as necessary, 不穩再加vdimm
0x9C = 通常是VCCIO問題,但有時vcore加過頭也會
0x50 = 記憶體參數問題..通常是太緊,或是vdimm不夠
0x109 = vdimm不夠..或是加太多
0x116 = 通常出現在跑多卡時,在x58則是IOH不夠,在1155/1156則是VGPU問題
0x7E = OS corruped(OS系統檔亂掉). Run sfc /scannow and chkdsk /r*

gn01934130

咁燒機 係唔係用Prime95黎燒???

gn01934130

我4.5ghz 用prime95 半秒都唔洗就藍畫面-.-
4.2ghz 用prime95 就10mins都無事...