Offer

我都中咗毒入了X 1官翻機，只是用不到手機打印，對質量和速度非常滿意，希望找到國際版的主板，或者有辦法 ...
yfwong68 發表於 2024-5-7 21:41

歡迎入列，你用落就知手機不是必須

Offer

每次打印最好也開錄像，因為開工單有機會會叫你比埋video佢地研究發生什麼事

yfwong68

多謝師兄通知

xo_ox

我都中咗毒入了X 1官翻機，只是用不到手機打印，對質量和速度非常滿意，希望找到國際版的主板，或者有辦法 ...
yfwong68 發表於 2024-5-7 13:41

歡迎入列 x2
printed by SD card?

xo_ox

有沒有簡單的方法來添加腔室熱感測器... ?

Offer

有沒有簡單的方法來添加腔室熱感測器... ?
xo_ox 發表於 2024-5-8 09:06

    有，可装x-touch,60人仔

下載 (521.08 KB)

2024-5-8 11:38

Optional Hardware
DS18B20 Temperature Sensor: For printers that do not have an integrated chamber temperature sensor, you have the option to add an external DS18B20 temperature sensor. This sensor will provide accurate chamber temperature readings and enhance the functionality of your xtouch screen. Connector on the screen is 1.25 MZ JST 4P.
DS18B20 P1P/P1S Chamber Temp Enclosure: Additionally, we have created a 3D model that allows you to easily integrate the DS18B20 Temperature Sensor inside your P1P/P1S printer.



https://github.com/xperiments-in/xtouch#optional-hardware

iamcm315

回覆 385# xo_ox

下載 (47.28 KB)

2024-5-8 13:20

最低成本方法

xo_ox

回覆  xo_ox

最低成本方法
iamcm315 發表於 2024-5-8 05:25

same ... $5-

下載 (85.78 KB)

2024-5-8 14:03

Offer

same ... $5-
xo_ox 發表於 2024-5-8 14:03

呢个位，正

ecorange

呢個唔係就係個溫度？仲要外加溫度計？

下載 (141.33 KB)

2024-5-8 17:58

via HKEPC IR 5.1.14 - iOS(5.1.1F)