vivi2341

按YES之後佢就係咁

[ 本帖最後由 vivi2341 於 2008-12-26 20:38 編輯 ]

mansiu

我真係recommand你唔好用debian
你連安裝都有問題無人會好咁好心機幫你

vivi2341

原帖由 mansiu 於 2008-12-26 20:41 發表
我真係recommand你唔好用debian
你連安裝都有問題無人會好咁好心機幫你

我都想唔用....
係ubuntu 安極都安唔到ISPCP....
但係我又需要....知道DEBIAN 易安所以想試下點知就出現Hardware 問題

我自己係vmware試安過先...係安到運行到
但係到真實試機安就.............

[ 本帖最後由 vivi2341 於 2008-12-26 20:48 編輯 ]

mansiu

你咁樣做你覺得岩咩?
就算俾你用到ispcp,你估debian真係咁易用?
為左解決一個問題而換黎更多問題

K仔X

ISPCP都未正式release....咁急用?

vivi2341

原帖由 mansiu 於 2008-12-26 20:50 發表
你咁樣做你覺得岩咩?
就算俾你用到ispcp,你估debian真係咁易用?
為左解決一個問題而換黎更多問題

主要唔係我搞的我對linux唔係咁熟
我安完之後ssh之後比個朋友搞的

howdy

as the first screenshot of network configuration "Detect Network Hardware" has told you, NO Ethernet card was auto-detected.... and there is no surprise that you can't configure it in later step...

Unless you are using a firewire network interface, which is very unlikely....

Pls let us know exactly what hardware configuration, preferably what network chip you have...
you should be able to find the information by looking up your motherboard model and specifications.

vivi2341

原帖由 howdy 於 2008-12-26 21:11 發表
as the first screenshot of network configuration "Detect Network Hardware" has told you, NO Ethernet card was auto-detected.... and there is no surprise that you can't configure it in later step...

U ...

motherboard is Intel DG33BU
http://www.intel.com/products/de ... DG33BU-overview.htm

foobar

Install 完之後會係你朋友 set ISPCP 定你自己 set? 如果係你朋友 set 的話你問o下佢要 etch 定 lenny (version 名黎架).

你塊板用張 LAN Card 99% Debian Stable 版 (etch) 個 Kernel (2.6.18) 未有 Driver, Debian 出o左隻叫 etch-and-half o既 Installer, 跟 2.6.24 Kernel, 斷估會認到掛, 如果要用 etch 試呢隻碟啦, 呢到 Download

最後講句, 可唔可以唔低炒影 TN LCD Mon

vivi2341

原帖由 foobar 於 2008-12-26 21:47 發表
Install 完之後會係你朋友 set ISPCP 定你自己 set? 如果係你朋友 set 的話你問o下佢要 etch 定 lenny (version 名黎架).

你塊板用張 LAN Card 99% Debian Stable 版 (etch) 個 Kernel (2.6.18) 未有 Driver, Debia ...

用小型腳架影..低炒的 無錢係用TN

[ 本帖最後由 vivi2341 於 2008-12-26 21:50 編輯 ]