Prerequisites for 30 FPS
In order to achieve 30 FPS there are some pretty stringent prerequisite conditions that need to be met:
You need to be shooting in compressed raw or jpeg file format.
Focus mode should be set to AF-C and drive mode to Hi+.
Electronic shutter speed between 1/250 – 1/32000 sec.
Priority Set in AF-C set to ‘Release’. The default is ‘Balanced Emphasis’. With it set to ‘Release’ the shutter will be released even if the subject is out of focus. With ‘Balanced Emphasis’ the camera tries to achieve a balance between focus and shutter release, however this reduces the maximum FPS slightly.
Use a focus mode other than tracking. If any of the tracking focus modes are used then you will not achieve the maximum FPS. So you’ll need to use a focus area like Wide or Zone instead.
Have the latest lens firmware version installed. |
簡體版
訂閱頻道
訂閱電子報
發表於 2021-9-16 12:00
| 
