marcochl

回覆 89# eriklai

其實我一眼都冇睇過 曝光模式 測光模式 Flicker AF/MF 驅動模式
雖然有好多垃圾 (期望第日software 上有人搞下) 但我覺得呢種holographic mode 真係好好用
個格線同水平儀好幫到手

mail4kawai

個OVF真係要電㗎，你試下拎舊電出黎，個OVF即刻暗左
aichun 發表於 2017-3-21 12:36

啱啱睇完部5D, 有冇電個OVF都係同一亮度。

via HKEPC Reader for Android

eriklai

回覆 91# marcochl

其實有格線就連水平儀都無必要用... 真係要校正水平,
一係落腳架, 一係用格線去睇位就夠~~~

而其他嘅... 老實講... 多餘囉~~~
如果 5D3對焦點分佈得更廣 (或更多對焦點) 而唔係太集中中央嘅話,
我真係連格線個功能都唔想開... 直接用對焦點個框對進行水平校正就係了~~~

eriklai

回覆 92# mail4kawai

5D/5D2/6D 都無果個夾心 LCD 啦...

mail4kawai

回覆  mail4kawai

5D/5D2/6D 都無果個夾心 LCD 啦...
eriklai 發表於 2017-3-21 19:39

我講嗰部係5D4

via HKEPC Reader for Android

leave

啱啱睇完部5D, 有冇電個OVF都係同一亮度。

via HKEPC Reader for Android
mail4kawai 發表於 2017-3-21 19:34

可以參考下呢篇Canon出既文章：http://www.learn.usa.canon.com/r ... inder_display.shtml

mail4kawai

可以參考下呢篇Canon出既文章：
leave 發表於 2017-3-21 20:00

我覆緊aichun個OVF冇暗到，唔係講緊佢有咩功能

via HKEPC Reader for Android

leave

我覆緊aichun個OVF冇暗到，唔係講緊佢有咩功能

via HKEPC Reader for Android
mail4kawai 發表於 2017-3-21 20:16

抱歉，我以為你會看到該文章中有關OVF亮度的部分。

The LCD overlay does require a tiny amount of electrical power to operate. This is obviously no concern when the camera is turned on, but if the battery is removed the transmissive LCD suddenly loses a lot of brightness and contrast. This is perfectly normal and will return to full brightness once a battery is reinstalled in the camera (the camera doesn't have to be turned on; it only requires a functioning battery pack to draw power for proper viewfinder operation).

jeremymak

平,細, 直出我覺得部xe2堅wor

我係小魚兒

回覆  我係小魚兒
果D唔係走焦
NPNT 發表於 2017-3-21 17:35

    應該係我手震失焦-3-