fengji987

THEN 要拎去換? 你更換前後有D咩分別?
如果只拆個block/radiator去已經OK　定要拆埋blackplate? ...
wongcc2006 發表於 2014-7-3 20:53

    連所有配件拎返去, 920停左產沒晒貨, 你可以揀換950/ h80i, 但要加錢

topdog

連所有配件拎返去, 920停左產沒晒貨, 你可以揀換950/ h80i, 但要加錢
fengji987 發表於 2014-7-3 21:10

    要加幾銀?

turnroundcow

好大機會壞泵

g2david

water problem.

g2david

http://www.hkepc.com/forum/viewthread.php?tid=2092231

wongcc2006

連所有配件拎返去, 920停左產沒晒貨, 你可以揀換950/ h80i, 但要加錢
fengji987 發表於 2014-7-3 21:10

    想問你 當時壞PUMP 是否完全不能散熱? 定只是好似我現在的情況 嚴重發熱?

wongcc2006

好大機會壞泵
turnroundcow 發表於 2014-7-3 22:23

    壞泵會不會完全不能散熱?

wongcc2006

water problem.
g2david 發表於 2014-7-3 22:46

    乾水??

g2david

回覆 18# wongcc2006


    It has some residues inside.  I has got your problem.  The pump is noisy. The copper side is not cold.  People say that leaving it for half an hour, it will clear up bubble. But after half an hour, the copper side is hotter than before.  

After a few months later, I took it apart.  I discover a lot of residues "stones".  Just like kidney stone.  Those stones can be squeezed with fingers to power like stuff.

I used water pump to flush it. It comes out lots lots of stones.  

Then I asked C hing in this forum how to refill it.. They are very helpful.

wongcc2006

回覆  wongcc2006


    It has some residues inside.  I has got your problem.  The pump is noisy. Th ...
g2david 發表於 2014-7-4 09:33

The pump is still quiet  and no sound. I think it is working and the liquid temperature is raising fast (from35c to 50c) in maybe one hour without gaming. Still finding the problem. Don't really want to remove it

via HKEPC Reader for Android