张无忌

回覆 488# nightsharski

在MikroTik的Forum都有人这样说！就是比TP-Link or D-LINK最低端的AP都不如！！！MT这个WiFi product实在让大家太失望了！！！

张无忌

回覆 489# 草帽仔

Reddit？哪条Link？

草帽仔

回覆 492# 张无忌

呢度應該唔俾貼LINK
係Mikrotik版
個topic叫 Any reviews of the new hAP ac² out yet?
最新個回覆

张无忌

回覆 490# johnliu

如果要求不高的话，勉勉强器的也能接受。

flhk

hAP ac^2 如何調整Tx power adjustment?

剋星

RC56出左........
5G好似好左.最高15MS
2.4G一樣1XXMS 仲有完全PING唔到

张无忌

hAP ac^2 如何調整Tx power adjustment?
flhk 發表於 2018-4-10 06:24

你在Wireless Tab，点击wlan1 or wlan2，然后在右手边有个advance mode，你点击它，再在wlan1，2上面就能看到tx power。

张无忌

之前做了不少的实验，知道问题出自哪里，现在我是我的Observations：
Let R1 be the hAP ac^2

Test 1. Laptop -> LAN -> Bridge of R1 -> WAN -> External BTest server: Performance very good
Test 2. Laptop -> wireless -> Bridge of R1 -> External BTest server: Performance very bad
Test 3. Laptop -> LAN - Bridge of R1 -> Internal BTest server: Performance very good
Test 4. Laptop -> wireless -> Bridge of R1 -> Internal BTest server: Performance very good

MikroTik router performs very well. However when it works with internal APs, problems comes!!! Based on the above observation, if hAP ac^2 is configured as an AP without routing and connected to a MikroTik router, I guess the performance would be acceptable. As after Test 4, I carried out another test by connecting an NAS to one of LAN ports of hAP ac^2. I carried out the actual file internal transfer test and found the actual file transfer rate could reach AT LEAST 380Mbps without any problem.

Based on the above findings, the problem comes from the link between the data of APs and the routing block to the external interface WAN port.

If the hAP ac^2 is configured as an AP, it should work very well.

plc1222

一早話左買隻AC68U唔使煩啦...

樹下乘涼

我比較想知道CCR系列幾時會有WIFI.....