audiokids

原帖由 looseman 於 2009-8-19 02:10 發表
最新firmware 1.62a....改良wifi connection, torrent 亂馬1/2

■ WZR-HP-G300NH_1.62_1.12_alpha
h​t​t​p​:​/​/​d​o​w​n​l​o​a​d​.​z​q​w​o​o​.​j​p​/​z​q​w​-​d​l​/​b​b ...

個 model 唔同喎, 用到咩?

stanleysamsam

我己用日版：wzr-hp-g300nh firmware (V1​.​6​2​_​1​.​1​2 ​_​a​l​p​h​a)
內建ＢＴ功能已穩定 速度大大提升,連開4天都無Hang機.

下載日版
h​t​t​p​:​/​/​d​o​w​n​l​o​a​d​.​z​q​w​o​o​.​j​p​/​z​q​w​-​d​l​/​b​b​s​/​w​z​r​-​h​p​-​g​3​0​0​n​h​/​W​Z​R​-​H​P​-​G​3​0​0​N​H​_​1​.​6​2​_​1​.​1​2 ​_​a​l​p​h​a

quofei

原帖由 stanleysamsam 於 2009-8-23 23:38 發表
我己用日版：wzr-hp-g300nh firmware (V1​.​6​2​_​1​.​1​2 ​_​a​l​p​h​a)
內建ＢＴ功能已穩定 速度大大提升,連開4天都無Hang機.

下載日版
h​t​t​p​:​/​/​d​o​w​n​l​o​a​d​.​z​ ...

呢個係alpha版....router會唔會同我講bye bye架:funk:

quofei

Update唔到...Invalid firmware

dickho

各位,
我set左個harddisk 10分鐘cut power,但10分鐘後仍然着。會唔會係因為我用WD harddisk呢?

hkcwnet

有得 出，就應該好快有正式版啦
唔會好似 M8 等了又等

docomohk2003

原帖由 yawoo 於 2009-6-30 20:52 發表


Yes. set返個router remote port, 你就可以經internet入你隻router admin page, 再叫醒你家的PC.

Brother... how to use WOL from router admin page ar??

i only know use port fowarding ja,...

audiokids

原帖由 docomohk2003 於 2009-8-26 23:19 發表

Brother... how to use WOL from router admin page ar??

i only know use port fowarding ja,...

In the first page "Setup" and select the button "Network Service List".

edwardngc

原帖由 docomohk2003 於 2009-8-26 23:19 發表

Brother... how to use WOL from router admin page ar??

i only know use port fowarding ja,...

記得要set 埋dhcp 手動指派, 如果唔係你一出屋企remote access的話, 即刻wake 唔著.

snowx

To: 2698,

I have followed all your conversation describing your problem and I have the following comments.

1) 2.6Mbps seems to be limited by your NAS hardware, therefore upgrading the router won't help in your situation.
2) Jumbo frame setting is only useful for your gigabit local network. It wouldn't help for BT download because the MTU size for your endpoint VDSL modem/router won't exceed 1500.
3) Your BT slow down problem is very likely caused by the immature buffalo firmware. ie, it may have limited TCP session table and does not recycle TCP session fast enough.  You best bet is to put NAS on the DMZ zone (true DMZ should not be NATed and it should not consume NAT TCP session table) to test if the slow down issue still occur...