123
返回列表 發帖
张无忌

Rank: 3Rank: 3Rank: 3
11# 跳轉到 »
發表於 2026-2-8 14:50 | 只看該作者
本帖最後由 张无忌 於 2026-2-12 05:41 編輯

Backup (GL.iNet + OpenWrt*)

如果只用 GL.iNet 就不能 backup，一定用 OpenWrt* 里 backup 功能。一般我有新的固件（new firmware），我用英文，所以在 /etc/opkg/distfeeds.com 里 fw.gl-inet.com，如果你在香港用英文 / 繁体就是 fw.gl-inet.com，不用改；但是我在大陆用，而且用英文版就要改成 fw.gl-inet.cn。

New firmware
OpenWrt* LuCI / shell + vi /etc/opkg/distfeeds.com, fw.gl-inet.com --> fw.gl-inet.cn
1st backup
==============
OpenWrt* shell + temperature (install only), opkg install luci-app-statistics collectd-mod-thermal htop
2nd backup
==============
* GL.iNet AdGuard home
3rd backup
==============
* GL.iNet Tailscale
+ OpenWrt* tailscale update; service tailscale restart
4th backup
==============

假如我重新来过，想到 4th backup，先
1. New firmware
2. OpenWrt* LuCI / shell + vi /etc/opkg/distfeeds.com, fw.gl-inet.com --> fw.gl-inet.cn
3. OpenWrt* shell + temperature (install only), opkg update, opkg install luci-app-statistics collectd-mod-thermal htop
4. OpenWrt* LuCI 4th backup


GL.iNet with OpenWrt* on GL-MT5000

TOP

张无忌

Rank: 3Rank: 3Rank: 3
12#
發表於 2026-2-8 19:00 | 只看該作者
本帖最後由 张无忌 於 2026-2-8 13:33 編輯

AdGuard Home

打开 hkepc 或者 hk01，广告很多，所以加广告软件，很多人用 AdGuard Home，GL.iNet 安装容易。

图1：在 APPLICATIONS -> AdGuard Home，选 Enable AdGuard Home，点击 Apply


图2：再选 AdGuard Home Handle Client Requests


如果看 hkepc 或 hk01 没有广告，如果没有拦截，等一等，或者重启。


GL.iNet with OpenWrt* on GL-MT5000
附件: 您需要登錄才可以下載或查看附件。沒有帳號？註冊

TOP

张无忌

Rank: 3Rank: 3Rank: 3
13#
發表於 2026-2-8 19:04 | 只看該作者
本帖最後由 张无忌 於 2026-2-11 07:59 編輯

CPU temperature

可以看 GL.iNet CPU 的温度和其他参数。

Listing 1：/etc/opkg/distfeeds.conf，香港安装 fw.gl-inet.com
  1. src/gz glinet_core https://fw.gl-inet.com/releases/v21.02-SNAPSHOT/mt7987a/kmod-5.4.281/aarch64_cortex-a53/kmod
  2. src/gz glinet_gli_pub https://fw.gl-inet.com/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/glinet
  3. src/gz glinet_gli_packages https://fw.gl-inet.com/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/packages
複製代碼
..

Listing 2：/etc/opkg/distfeeds.conf，大陆安装 fw.gl-inet.cn
  1. src/gz glinet_core https://fw.gl-inet.cn/releases/v21.02-SNAPSHOT/mt7987a/kmod-5.4.281/aarch64_cortex-a53/kmod
  2. src/gz glinet_gli_pub https://fw.gl-inet.cn/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/glinet
  3. src/gz glinet_gli_packages https://fw.gl-inet.cn/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/packages
複製代碼
..

图1：用 PuTTY IP=192.168.8.1


Listing 3：
  1. opkg update
  2. opkg install luci-app-statistics collectd-mod-thermal htop
複製代碼
..

图2：OpenWrt LuCI，有 Statistics -> Setup


图3：选 General plugins，点击 Thermal=Enabled


图4：在 Thermal Plugin Configuration，点击 Save


图5：点击 Save & Apply


图6：Statistics -> Graphs


图7：Thermal (CPU temperature)



GL.iNet with OpenWrt* on GL-MT5000
附件: 您需要登錄才可以下載或查看附件。沒有帳號？註冊

TOP

张无忌

Rank: 3Rank: 3Rank: 3
14#
發表於 2026-2-8 19:08 | 只看該作者
本帖最後由 张无忌 於 2026-2-14 06:43 編輯

Tailscale subnets and exit node

新来的 HKPEC members，在大陆都是非公网（CG-NAT），如果不在大陆家里都不可以看不到家里路由器，如果用了 GL.iNet 路由器，只要启动 GL.iNet Tailscale subnets，就可以大陆或香港看到大陆家里的路由器；在 GL.iNet 里的 OpenWrt* 修改，便成为 Tailscale exit node，可以看当地的TV，Apple TV (tvOS 17+) 里都有 Tailscale exit node。

A GL.iNet Tailscale subnets
B 关闭 key expiry
C 升级 Tailscale
D OpenWrt* 安装 Tailscale exit node
E 安装自动 reboot Tailscale

######################
A GL.iNet Tailscale subnets

A图1：APPLICATIONS -> Tailscale


A图2：选 Enable，点击 Apply


A图3：第一次出现 GL.iNet Tailscale，选 Allow Remote Access WAN and LAN，点击 Apply


A图4：点击 The Device Bind Link


A图5：出现 https，点击 https


A图6：点击 Sign in


A图7：点击 xxx@gmail.com


A图8：Connect device，点击 Connect


A图9：Login successful，点击 visit the console


A图10：Machine 里 gl-mt5000，在右手面 ...，点击 ...


A图11：点击 Edit route settings


A图12：点击 Approve all，再点击 Save


A图13：Subnets 出现


######################
B 关闭 key expiry

B图1：点击 Disable key expiry


B图2：出现 Expiry disabled


######################
C 升级 Tailscale

tailscale update
service tailscale restart

C1：tailscale update
  1. root@GL-MT5000:~# tailscale update
  2. This will update Tailscale from 1.80.3 to 1.94.1. Continue? [y/n] y
  3. Downloading "https://pkgs.tailscale.com/stable/tailscale_1.94.1_arm64.tgz"
  4. Download size: 32779844
  5. Downloaded 512/32779844 (0.0%)
  6. Downloaded 32779844/32779844 (100.0%)
  7. Downloading "https://pkgs.tailscale.com/stable/tailscale_1.94.1_arm64.tgz.sig"
  8. Signature OK
  9. Extracting "/root/.cache/tailscale-update/tailscale_1.94.1_arm64.tgz"
  10. Updated /usr/sbin/tailscale
  11. Updated /usr/sbin/tailscaled
  12. Tailscale binaries updated successfully.
  13. Please restart tailscaled to finish the update.
  14. root@GL-MT5000:~#
複製代碼
..

C2：service tailscale restart
  1. root@GL-MT5000:~# service tailscale restart
  2. TPM: error opening: stat /dev/tpmrm0: no such file or directory
  3. logtail started
  4. Program starting: v1.94.1-t62c6f1cd7-g09fea6572, Go 1.25.5: []string{"/usr/sbin/tailscaled", "--cleanup"}
  5. LogID: e7b78c8d6284a93e8c8add3963825a9a0d9b0383e2e76b8c93e79232e3dfc005
  6. logpolicy: using system state directory "/var/lib/tailscale"
  7. dns: [rc=unknown ret=direct]
  8. dns: using "direct" mode
  9. dns: using *dns.directManager
  10. dns: inotify: NewDirWatcher: context canceled
  11. flushing log.
  12. logger closing down
  13. root@GL-MT5000:~#
複製代碼
..

C图1：Label 1.94.1


######################
D OpenWrt* 安装 Tailscale exit node

D1："tailscale up --advertise-routes=192.168.8.0/24,192.168.55.0/24 --snat-subnet-routes=false --advertise-exit-node --reset" 就是加一句，便有大陆 IP exit node。
  1. root@GL-MT5000:~# tailscale up --advertise-routes=192.168.8.0/24,192.168.55.0/24
  2. --snat-subnet-routes=false --advertise-exit-node --reset
  3. Some peers are advertising routes but --accept-routes is false
  4. root@GL-MT5000:~#
複製代碼
..

D图1：点击 Exit node，点击 Save


D图2：Exit Node 出现


######################
E 安装自动 reboot Tailscale

就是 reboot router 后，exit node 不能工作；所以加 "( sleep 60; tailscale set --advertise-exit-node ) &" 在 OpenWrt* System -> Startup，Local Startup。

E1: Reboot 后，一次 "( sleep 60; tailscale set --advertise-exit-node ) &"
  1. # Put your custom commands here that should be executed once
  2. # the system init finished. By default this file does nothing.

  4. . /lib/functions/gl_util.sh
  5. remount_ubifs

  7. echo 3 > /proc/sys/vm/drop_caches

  9. ( sleep 60; tailscale set --advertise-exit-node ) &

  11. exit 0
複製代碼
..


GL.iNet with OpenWrt* on GL-MT5000
附件: 您需要登錄才可以下載或查看附件。沒有帳號？註冊

TOP

张无忌

Rank: 3Rank: 3Rank: 3
15#
發表於 2026-2-10 19:49 | 只看該作者
本帖最後由 张无忌 於 2026-2-11 02:19 編輯

WireGuard client

大陆 WireGuard client 联系香港的 WireGuard servers （MikroTik，GL.iNet，OpenWrt）。

Windows WireGuard client (copied from GL-TM3600BE WireGuard server in HK)
  1. [Interface]
  2. PrivateKey = MP4W9PopEyQt4Yo9ZP85wBtGO7qWjolpHlsy4crxrV4=
  3. Address = 10.1.0.2/24, fd00:9262:bc00:b88c::2/64
  4. DNS = 10.1.0.1, fd00:9262:bc00:b88c::1, 64.6.64.6
  5. MTU = 1420

  7. [Peer]
  8. PublicKey = rHT/pRV/ovJr7tVgRQQ2vaQA3WkcLo4C1gnV1Xd9YhM=
  9. AllowedIPs = 0.0.0.0/0, ::/0
  10. Endpoint = xxx.glddns.com:51820
  11. PersistentKeepalive = 25
複製代碼
..

图1：VPN WireGuard client，点击 +Add Manually


图2：再点击 Manually Add Configuration


图3：Copy-and-paste from 图1 and then 点击 Apply


图4：点击右手面 ...


图5：选 Start


图6：看左手面边有绿点，说明 WireGuard 成功（大陆 VPN 香港）


图7：要停止，按 Stop


图8：另外 WireGuard 可以在 VPN Dashboard 操作




GL.iNet with OpenWrt* on GL-MT5000
附件: 您需要登錄才可以下載或查看附件。沒有帳號？註冊

TOP

robotmaster

Rank: 2Rank: 2
16#
發表於 2026-2-10 22:25 | 只看該作者
有 patch submission 想加入 OpenWRT 的官方支援 :

mediatek: filogic: add support for GL.iNet MT5000 (Brume3)
https://github.com/openwrt/openwrt/pull/21728

TOP

张无忌

Rank: 3Rank: 3Rank: 3
17#
發表於 2026-2-15 17:28 | 只看該作者
本帖最後由 张无忌 於 2026-2-17 09:59 編輯

旧安装 GL.iNet GL-MT5000 PassWall
GL-MT5000 4.8.4
OpenWrt* 21.02
PassWall 26.1.13

GL.iNet GL-TM3000 also works

Step A1: 大陆安装的 /etc/opkg/distfeeds.conf，fw.gl-inet.cn
  1. src/gz glinet_core https://fw.gl-inet.cn/releases/v21.02-SNAPSHOT/mt7987a/kmod-5.4.281/aarch64_cortex-a53/kmod
  2. src/gz glinet_gli_pub https://fw.gl-inet.cn/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/glinet
  3. src/gz glinet_gli_packages https://fw.gl-inet.cn/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/packages
複製代碼
..

Step A2: 香港安装的 /etc/opkg/distfeeds.conf，fw.gl-inet.com
  1. src/gz glinet_core https://fw.gl-inet.com/releases/v21.02-SNAPSHOT/mt7987a/kmod-5.4.281/aarch64_cortex-a53/kmod
  2. src/gz glinet_gli_pub https://fw.gl-inet.com/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/glinet
  3. src/gz glinet_gli_packages https://fw.gl-inet.com/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/packages
複製代碼
..

Step B: 安装大陆悟空两个 ipks，
  1. wget "https://cafe.cpolar.cn/wkdaily/gl/raw/branch/main/theme/luci-lua-runtime_all.ipk" -O /tmp/luci-lua-runtime_all.ipk
  2. wget "https://cafe.cpolar.cn/wkdaily/gl/raw/branch/main/theme/libopenssl3.ipk" -O /tmp/libopenssl3.ipk
  3. opkg update
  4. opkg install /tmp/luci-lua-runtime_all.ipk /tmp/libopenssl3.ipk
複製代碼
..

Step C: Including two main and zip files. If fail then use WireGuard copy and transfer to OpenWrt shell.
  1. wget "https://github.com/Openwrt-Passwall/openwrt-passwall/releases/download/26.1.13-1/luci-app-passwall_26.1.13-r1_all.ipk" -O luci-app-passwall_26.1.13-r1_all.ipk
  2. wget "https://github.com/Openwrt-Passwall/openwrt-passwall/releases/download/26.1.13-1/luci-i18n-passwall-zh-cn_26.1.13_all.ipk" -O luci-i18n-passwall-zh-cn_26.1.13_all.ipk
  3. wget "https://github.com/Openwrt-Passwall/openwrt-passwall/releases/download/26.1.13-1/passwall_packages_ipk_aarch64_cortex-a53.zip" -O passwall_packages_ipk_aarch64_cortex-a53.zip
複製代碼
..

Step D: unzip
  1. unzip passwall*
複製代碼
..

Step E: Move *.* /tmp
  1. mv *.* /tmp
複製代碼
..

Step F: cd /tmp; opkg install *.ipk --force-reinstall
  1. cd /tmp; opkg install *.ipk --force-reinstall
複製代碼
..

在这里不需要科学上网。
GL-TM3000 works。

############## 可能不用 ################
App update for all other apps except PassWall

Download the most updated files for PassWall version
  1. wget -O passwall-zh-cn.ipk https://github.com/Openwrt-Passwall/openwrt-passwall/releases/download/26.2.14-1/23.05-24.10_luci-i18n-passwall-zh-cn_26.2.14_all.ipk
  2. wget -O passwall.ipk https://github.com/Openwrt-Passwall/openwrt-passwall/releases/download/26.2.14-1/23.05-24.10_luci-app-passwall_26.2.14-r1_all.ipk
複製代碼
..

Add new update
  1. opkg install pass*.ipk
複製代碼
..


Reference:
[1] Openwrt-Passwall / openwrt-passwall


GL.iNet with OpenWrt* on GL-MT5000

TOP

张无忌

Rank: 3Rank: 3Rank: 3
18#
發表於 2026-2-15 18:33 | 只看該作者
本帖最後由 张无忌 於 2026-2-16 11:32 編輯

新安装 GL.iNet GL-MT5000 PassWall using method 1
GL-MT5000 4.8.4
OpenWrt* 21.02
PassWall 26.2.14

GL.iNet GL-TM3000 also works

大陆安装的 /etc/opkg/distfeeds.conf，fw.gl-inet.cn
  1. src/gz glinet_core https://fw.gl-inet.cn/releases/v21.02-SNAPSHOT/mt7987a/kmod-5.4.281/aarch64_cortex-a53/kmod
  2. src/gz glinet_gli_pub https://fw.gl-inet.cn/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/glinet
  3. src/gz glinet_gli_packages https://fw.gl-inet.cn/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/packages
複製代碼
..

香港安装的 /etc/opkg/distfeeds.conf，fw.gl-inet.com
  1. src/gz glinet_core https://fw.gl-inet.com/releases/v21.02-SNAPSHOT/mt7987a/kmod-5.4.281/aarch64_cortex-a53/kmod
  2. src/gz glinet_gli_pub https://fw.gl-inet.com/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/glinet
  3. src/gz glinet_gli_packages https://fw.gl-inet.com/releases/v21.02-SNAPSHOT/mt7987a/packages/aarch64_cortex-a53/packages
複製代碼
..

Install via OPKG

1. Add new opkg key:
  1. wget -O passwall.pub https://master.dl.sourceforge.net/project/openwrt-passwall-build/passwall.pub
  2. opkg-key add passwall.pub
複製代碼
..

If OpenWrt* 21.02 then go to Step 4.

2. Add opkg repository:
  1. read release arch << EOF
  2. $(. /etc/openwrt_release ; echo ${DISTRIB_RELEASE%.*} $DISTRIB_ARCH)
  3. EOF
  4. for feed in passwall_luci passwall_packages passwall2; do
  5.   echo "src/gz $feed https://master.dl.sourceforge.net/project/openwrt-passwall-build/releases/packages-$release/$arch/$feed" >> /etc/opkg/customfeeds.conf
  6. done
複製代碼
..

3. /etc/opkg/customfeeds.conf
  1. # add your custom package feeds here
  2. #
  3. # src/gz example_feed_name http://www.example.com/path/to/files
  4. src/gz passwall_luci https://master.dl.sourceforge.net/project/openwrt-passwall-build/releases/packages-21/aarch64_cortex-a53/passwall_luci
  5. src/gz passwall_packages https://master.dl.sourceforge.net/project/openwrt-passwall-build/releases/packages-21/aarch64_cortex-a53/passwall_packages
  6. src/gz passwall2 https://master.dl.sourceforge.net/project/openwrt-passwall-build/releases/packages-21/aarch64_cortex-a53/passwall2
複製代碼
..

4. Change 21 to 21.02，/etc/opkg/customfeeds.conf
  1. # add your custom package feeds here
  2. #
  3. # src/gz example_feed_name http://www.example.com/path/to/files
  4. src/gz passwall_luci https://master.dl.sourceforge.net/project/openwrt-passwall-build/releases/packages-21.02/aarch64_cortex-a53/passwall_luci
  5. src/gz passwall_packages https://master.dl.sourceforge.net/project/openwrt-passwall-build/releases/packages-21.02/aarch64_cortex-a53/passwall_packages
  6. src/gz passwall2 https://master.dl.sourceforge.net/project/openwrt-passwall-build/releases/packages-21.02/aarch64_cortex-a53/passwall2
複製代碼
..

5. Install package:
  1. opkg update
  2. opkg install luci-app-passwall
複製代碼
..

6. App update（在大陆需要科学上网，在香港不用科学上网）
图1：


图2：


图3：


[1] Openwrt-Passwall / openwrt-passwall


GL.iNet with OpenWrt* on GL-MT5000
附件: 您需要登錄才可以下載或查看附件。沒有帳號？註冊

TOP

张无忌

Rank: 3Rank: 3Rank: 3
19#
發表於 2026-2-15 20:53 | 只看該作者
本帖最後由 张无忌 於 2026-2-16 11:32 編輯

新安装 GL.iNet GL-MT5000 PassWall using method 2（修改中）
GL-MT5000 4.8.4
OpenWrt* 21.02
PassWall 26.2.14

Next
  1. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/v2ray-geoip_202602050029.1_all.ipk -O v2ray-geoip_202602050029.1_all.ipk
  2. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/v2ray-geosite_202602052221.1_all.ipk -O v2ray-geosite_202602052221.1_all.ipk
  3. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/microsocks_1.0.5-1_aarch64_cortex-a53.ipk -O microsocks_1.0.5-1_aarch64_cortex-a53.ipk
  4. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/naiveproxy_143.0.7499.109-2_aarch64_cortex-a53.ipk -O naiveproxy_143.0.7499.109-2_aarch64_cortex-a53.ipk
  5. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/dns2socks_2.1-2_aarch64_cortex-a53.ipk -O dns2socks_2.1-2_aarch64_cortex-a53.ipk
  6. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/trojan-plus_10.0.3-2_aarch64_cortex-a53.ipk -O trojan-plus_10.0.3-2_aarch64_cortex-a53.ipk
  7. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/chinadns-ng_2025.08.09-1_aarch64_cortex-a53.ipk -O chinadns-ng_2025.08.09-1_aarch64_cortex-a53.ipk
  8. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/shadowsocksr-libev-ssr-nat_2.5.6-11_aarch64_cortex-a53.ipk -O shadowsocksr-libev-ssr-nat_2.5.6-11_aarch64_cortex-a53.ipk
  9. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/shadowsocksr-libev-ssr-redir_2.5.6-11_aarch64_cortex-a53.ipk -O shadowsocksr-libev-ssr-redir_2.5.6-11_aarch64_cortex-a53.ipk
  10. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/shadowsocksr-libev-ssr-server_2.5.6-11_aarch64_cortex-a53.ipk -O shadowsocksr-libev-ssr-server_2.5.6-11_aarch64_cortex-a53.ipk
  11. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/tcping_0.3-1_aarch64_cortex-a53.ipk -O tcping_0.3-1_aarch64_cortex-a53.ipk
  12. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/shadowsocksr-libev-ssr-check_2.5.6-11_aarch64_cortex-a53.ipk -O shadowsocksr-libev-ssr-check_2.5.6-11_aarch64_cortex-a53.ipk
  13. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/shadowsocksr-libev-ssr-local_2.5.6-11_aarch64_cortex-a53.ipk -O shadowsocksr-libev-ssr-local_2.5.6-11_aarch64_cortex-a53.ipk
  14. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/shadowsocks-libev-ss-local_3.3.5-13_aarch64_cortex-a53.ipk -O shadowsocks-libev-ss-local_3.3.5-13_aarch64_cortex-a53.ipk
  15. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/shadowsocks-libev-ss-redir_3.3.5-13_aarch64_cortex-a53.ipk -O shadowsocks-libev-ss-redir_3.3.5-13_aarch64_cortex-a53.ipk
  16. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/shadowsocks-libev-ss-server_3.3.5-13_aarch64_cortex-a53.ipk -O shadowsocks-libev-ss-server_3.3.5-13_aarch64_cortex-a53.ipk
  17. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/shadowsocks-libev-ss-tunnel_3.3.5-13_aarch64_cortex-a53.ipk -O shadowsocks-libev-ss-tunnel_3.3.5-13_aarch64_cortex-a53.ipk
  18. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/simple-obfs-client_0.0.5-3_aarch64_cortex-a53.ipk -O simple-obfs-client_0.0.5-3_aarch64_cortex-a53.ipk
  19. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/simple-obfs-server_0.0.5-3_aarch64_cortex-a53.ipk -O simple-obfs-server_0.0.5-3_aarch64_cortex-a53.ipk
  20. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/tuic-client_1.0.0-1_aarch64_cortex-a53.ipk -O tuic-client_1.0.0-1_aarch64_cortex-a53.ipk
  21. wget https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-21.02/aarch64_cortex-a53/passwall_packages/ipt2socks_1.1.4-3_aarch64_cortex-a53.ipk -O ipt2socks_1.1.4-3_aarch64_cortex-a53.ipk
複製代碼
..


[1] Openwrt-Passwall / openwrt-passwall


GL.iNet with OpenWrt* on GL-MT5000

TOP

vcyu2010

Rank: 2Rank: 2
20#
發表於 2026-2-16 07:40 | 只看該作者
本帖最後由 vcyu2010 於 2026-2-16 07:44 編輯
我唯一的广联 router GL-MT5000，它如 GL-MT6000 没有 Wi-Fi，只有 3 ports 2.5G，RAM 1G，flash 8G；一般 ...
张无忌 發表於 2026-2-2 13:04


師兄你好，謝謝你的分享。
我買了淘寶的mt3600be router.
我轉區後有返vpn的功能。
但tailscale 個到有個問題，就係每次reboot 後個tailsacale 好似睡死左咁。我有跟足你步驟去做，都有打sleep60個段嘢。我是用putty 的。已經試過重設幾次再做，都係一樣。做完所有步驟，手機係成功連弋tailscale 的，但一重新開機，tailscale 個main console 個頁subnet 和node 就會有！號。想問係咪死症冇得搞bug 嚟？

我上網搵左個方法，每次 reboot 完後都要用佢e個方法人手啟動tailscale 。
https://letitcode.dev/t/how-to-m ... -as-an-exit-node/68
整完就啟動到，但reboot完又係唔得。又係好似睡死咁。
謝謝你🙏

TOP

123
返回列表