D_d

reset nvram try try

turn off the router > press and hold the WPS button > turn on the route ...
benny8888 發表於 2018-7-6 12:05

    得返usb2.0 著

uncle9

得返usb2.0 著
D_d 發表於 2018-7-6 12:11

冇插嘢照長着?

嘩…lan都冇得試, 咁有d唔敢搏喎...
初頭聽到有ching報料佢地d AC66U係B1 仲想去馬㵕…

via HKEPC Reader for Android

benny8888

得返usb2.0 著
D_d 發表於 2018-7-6 12:11

得返usb2.0 著 try try rescues mode again ?

    https://www.snbforums.com/thread ... ed-lights-up.23920/
https://www.snbforums.com/thread ... sb-2-0-light.36479/

Recovery mode:
Have a firmware file available, ending with the extension .trx
Power down the router.
Remove USB memory devices (if any).
Press and hold the reset button, at the same time power up the router.
Wait for slow flashing Power LED.
Release the reset button.
Set your computer to a fixed IP address, such as 192.168.1.100 / 255.255.255.0.
Hardwire your computer to the router.
Start the Firmware Restoration utility.
Follow the instructions to locate the firmware file and start the installation.
Wait for the Firmware Restoration utility to finish.
Access the router at the default IP address 192.168.1.1 and admin/admin
Manual configure the router again (do NOT load an old configuration backup file).
Optional: delete the wireless connection profiles on your computers and connect again.

Specially when you can Ping the router:
After step 8 you can also start a web browser and open http://192.168.1.1
This shall open the ASUSTeK - CFE miniWeb Server, from there you can Upload a Firmware File, Reboot or Restore default NVRAM values.

mpc05

回覆 90# winsel


  我見大部份買AC5300 多, 價錢差太小啦.

winsel

回覆 94# mpc05

RT-5300 無獲氣咩?
上面有師兄瀨野><

dmccplny

小弟有兩問題. 1. AC66U and AC68U, 差一倍價錢, AC66U用三房屋係咪唔夠強? 2. 我電腦唔太好, 係咪唔好去屯門買, 雖然我係屯門活動. 佢有冇guideline or manual 教點裝同用? 謝謝

s2140091

小弟有兩問題. 1. AC66U and AC68U, 差一倍價錢, AC66U用三房屋係咪唔夠強? 2. 我c, 係咪唔好去屯 ...
dmccplny 發表於 2018-7-6 14:06

唔關電腦好唔好，係睇你敢唔敢冒險買無保養產品
至於點安裝/setup可以自己上華碩download user manual慢慢睇

benny8888

Is it 8 port ac5300 ?
pomkon 發表於 2018-7-6 14:32

    rt-ac5300 only 4port , GT-ac5300 先8port