MikroTik RouterOS 6.14 Released ~ 06/10/2014

What's new in 6.14 (2014-Jun-06 15:34):

*) sntp - 'mode' now is a read-only property, it is set to broadcast if no
server ip address is specified;
*) smb - fixed some SMB1 errors;
*) wireless-fp package is now included in routeros one (disabled by default);
*) webfig - fixed quickset, it didn't work with disabled wireless pacakge;
*) sstp - fixed problem where session was closed every 2min;
*) pptp,l2tp,pppoe - fixed problem where some of the static bindings
become dynamic interfaces;
*) eoip - lowered default MTU to avoid IP packet fragmentation;
*) eoip - added clamp-tcp-mss setting with default=yes for new tunnels to avoid
IP packet fragmentation;
*) fixed - bridge could sometimes get added without "running" flag;
*) fixed - simple queues could sometimes crash router;
*) fixed - simple queue stats freeze (empty winbox queue window);
*) ssh server - allow none cipher;
*) proxy - added 'anonymous' option which will skip adding X-* and Via headers;
*) dhcp server - added option use-framed-as-classless and
added support for DHCP-Classless-Static-Route RADIUS attribute;
*) quickset - fixed problem where address mode selection did not work in
bridge mode;
*) ipv6 address - fixed problem where changing advertise lost ipv6 connected route;

What's new in 6.13 (2014-May-15 16:03):

*) console - comments are now accepted where new command can start, that is,
where '/' or ':' characters can be used to start new command, e.g.
/interface { # comment until the end of the line
print
}
*) backup - backups by default are encrypted now (with user password).
To use backup on older versions, you should disable encryption with dont-encrypt
flag when creating it;
*) files with '.sensitive.' in the filename require 'sensitive'
permission to manipulate;
*) lcd - reduce CPU usage when displaying static screens;
*) l2tp - fixed occasional server lockup;
*) pptp - fixed memory leak;
*) sstp - fixed crashes;

What's new in 6.12 (2014-Apr-14 09:27):

*) l2tp - fixed "no buffer space available" problem;
*) ipsec - support IPv4 over IPv6 and vice versa;
*) pppoe - report correctly number of active links;
*) updated timezone information;
*) many fixes for CRS managed switch functionality -
particularly improved VLAN support, port isolation, defaults;
*) added trunk support for CRS switches;
*) added policing support for CRS switches;
*) www - added support for HTTP byte ranges;
*) lte - provide signal strength using snmp and make 'info once' work in console;

What's new in 6.11 (2014-Mar-20 09:16):

*) ipsec - fix aes-cbc hardware acceleration on CCR with key sizes 192 and 256;
*) wireless - add auto frequency feature;
*) ovpn - fixed TLS renegotiation;
*) ovpn - make bridge mode work with big packets (do not leave extraneous padding);
*) ovpn - fixed require-client-certifcate;
*) ppp - revert RADIUS NAS-Port behaviour, report tunnel interface id;
*) ppp - mppe encryption together with mrru locked the router;
*) dhcp - added support for DHCP option 138 - list of CAPWAP IPv4 servers;
*) quickset - added Guest Network setup to Home AP mode;
*) console - no longer required to supply value of '/routing bgp instance vrf'
property 'instance' for 'add' command;
*) ethernet - added option to enable rx/tx flow control
(will be disabled by default);
*) ethernet - added ability to specify advertised modes for copper ports;
*) fixed 100% cpu usage on CCRs;
*) ssl - not finding CRL in local store for any certificate in trust chain will cause connection to fail;
*) lte - support for Huawei ME609 and ME909u-521;

Download:
http://www.mikrotik.com/download.html