返回列表 發帖
xiao

Rank: 3Rank: 3Rank: 3
1# 跳轉到 » 倒序看帖
打印
tT
發表於 2014-7-13 21:28 | 只看該作者

[操作疑難] Openwrt, 如何使用更大的存儲空間

本帖最後由 xiao 於 2014-7-13 21:33 編輯

Openwrt 可以由 USB DRIVE 啟動 ROUTER, 並且可司用用更大的存儲空間嗎

初初玩 openwrt, 對 linux 也是一知半解, 用的是 ASUS ROUTER, WL-500gd, 有兩個 USB 口, 一個接 MODEM, 另外一個想接 USB drive 或者 16G SD CARD.

需要安裝 Asterisk, 加上 FAX 的模組, 可是說空間只剩 360K, 不夠放 900K

請有識之士指點.









log　如下,
  1. ..
  2. .
  3. .CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
  4. .Build Date: 二  3月  1 16:49:41 CST 2005 (root@PaNLinux)

  6. .pyright (C) 2000,2001,2002,2003 Broadcom Corporation.

  8. .
  9. .itializing Arena.

  11. .itializing Devices.

  13. .0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 1.3.2.0

  15. .dis0: Broadcom USB RNDIS Network Adapter (P-t-P)

  17. .U type 0x29007: 200MHz

  19. .tal memory: 0x2000000 bytes (32MB)

  21. .
  22. .tal memory used by CFE:  0x80300000 - 0x80436F10 (1273616)

  24. .itialized Data:          0x803313D0 - 0x80333760 (9104)
  25. .BSS Area:                  0x80333760 - 0x80334F10 (6064)
  26. .Local Heap:                0x80334F10 - 0x80434F10 (1048576)
  27. .Stack Area:                0x80434F10 - 0x80436F10 (8192)
  28. .Text (code) segment:       0x80300000 - 0x803313D0 (201680)
  29. .Boot area (physical):      0x00437000 - 0x00477000
  30. .Relocation Factor:         I:00000000 - D:00000000
  31. .
  32. .Device eth0:  hwaddr 00-13-D4-92-07-DC, ipaddr 192.168.1.1, mask 255.255.255.0
  33.         gateway not set, nameserver not set
  34. Rescue Flag disable.
  35. Reading :: TFTP Server.
  36. Failed.: Timeout occured
  37. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
  38. .Loading: .. 3780 bytes read
  39. .Entry at 0x80001000
  40. .Closing network.
  41. Starting program at 0x80001000
  42. [    0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Mar 23 16:01:31 UTC 2013
  43. .[    0.000000] CPU revision is: 00029007 (Broadcom BMIPS3300)
  44. .[    0.000000] bcm47xx: using ssb bus
  45. .[    0.000000] ssb: Found chip with id 0x5365, rev 0x01 and package 0x00
  46. .[    0.000000] ssb: chipcommon status is 0x0
  47. .[    0.000000] ssb: Initializing MIPS core...
  48. .[    0.000000] ssb: set_irq: core 0x0806, irq 4 => 4
  49. .[    0.000000] ssb: set_irq: core 0x080b, irq 5 => 2
  50. .[    0.000000] ssb: set_irq: core 0x0804, irq 2 => 5
  51. .[    0.000000] ssb: after irq reconfiguration
  52. .[    0.000000] ssb: core 0x0800, irq : 2(S)  3* 4  5  6  D  I
  53. .[    0.000000] ssb: core 0x0806, irq : 2(S)  3  4* 5  6  D  I
  54. .[    0.000000] ssb: core 0x080b, irq : 2(S)* 3  4  5  6  D  I
  55. .[    0.000000] ssb: core 0x0808, irq : 2(S)  3  4  5  6* D  I
  56. .[    0.000000] ssb: core 0x0804, irq : 2(S)  3  4  5* 6  D  I
  57. .[    0.000000] ssb: core 0x0816, irq : 2(S)* 3  4  5  6  D  I
  58. .[    0.000000] ssb: core 0x080f, irq : 2(S)  3  4  5  6  D  I*
  59. .[    0.000000] found parallel flash.
  60. .[    0.000000] can not parse nvram name (null)boardtype(null) with value bcm95365r got -22
  61. .[    0.000000] can not parse nvram name (null)boardtype(null) with value bcm95365r got -22
  62. .[    0.000000] Unsupported SPROM revision 0 detected. Will extract v1
  63. .[    0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000
  64. .[    0.000000] gpiochip_add: registered GPIOs 0 to 15 on device: bcm47xx
  65. .[    0.000000] Determined physical RAM map:
  66. .[    0.000000]  memory: 02000000 @ 00000000 (usable)
  67. .[    0.000000] Initrd not found or empty - disabling initrd
  68. .[    0.000000] Zone PFN ranges:
  69. .[    0.000000]   Normal   0x00000000 -> 0x00002000
  70. .[    0.000000] Movable zone start PFN for each node
  71. .[    0.000000] Early memory PFN ranges
  72. .[    0.000000]     0: 0x00000000 -> 0x00002000
  73. .[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
  74. .[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  75. .[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  76. .[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  77. .[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  78. .[    0.000000] Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes.
  79. .[    0.000000] Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes
  80. .[    0.000000] Memory: 29100k/32768k available (2540k kernel code, 3668k reserved, 379k data, 168k init, 0k highmem)
  81. .[    0.000000] NR_IRQS:128
  82. .[    0.000000] console [ttyS0] enabled
  83. .[    0.004000] Calibrating delay loop... 197.63 BogoMIPS (lpj=395264)
  84. .[    0.044000] pid_max: default: 32768 minimum: 301
  85. .[    0.048000] Mount-cache hash table entries: 512
  86. .[    0.060000] NET: Registered protocol family 16
  87. [    0.124000] bio: create slab <bio-0> at 0
  88. [    0.144000] Switching to clocksource MIPS
  89. [    0.168000] ssb: PCIcore in host mode found
  90. [    0.484000] PCI host bridge to bus 0000:00
  91. [    0.488000] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff]
  92. [    0.496000] pci_bus 0000:00: root bus resource [io  0x0100-0x07ff]
  93. [    0.504000] PCI: Fixing up bridge 0000:00:00.0
  94. [    0.508000] PCI: Fixing up device 0000:00:00.0
  95. [    0.512000] PCI: Fixing latency timer of device 0000:00:00.0 to 168
  96. [    0.532000] pci 0000:00:03.0: BAR 0: assigned [mem 0x40000000-0x40001fff]
  97. [    0.540000] pci 0000:00:02.2: BAR 0: assigned [mem 0x40002000-0x400020ff]
  98. [    0.548000] pci 0000:00:02.0: BAR 4: assigned [io  0x0400-0x041f]
  99. [    0.552000] pci 0000:00:02.1: BAR 4: assigned [io  0x0420-0x043f]
  100. [    0.568000] PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
  101. [    0.572000] PCI: Fixing up device 0000:00:03.0
  102. [    0.580000] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00
  103. [    0.588000] ssb: chipcommon status is 0x0
  104. [    0.592000] ssb: SPROM offset is 0x1000
  105. [    0.604000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:03.0
  106. [    0.616000] NET: Registered protocol family 2
  107. [    0.624000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  108. [    0.632000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  109. [    0.640000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  110. [    0.648000] TCP: Hash tables configured (established 1024 bind 1024)
  111. [    0.652000] TCP reno registered
  112. [    0.656000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  113. [    0.664000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  114. [    0.672000] NET: Registered protocol family 1
  115. [    0.692000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  116. .[    0.700000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  117. .[    0.712000] msgmni has been set to 56
  118. .[    0.716000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  119. .[    0.724000] io scheduler noop registered
  120. .[    0.728000] io scheduler deadline registered (default)
  121. .[    0.736000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  122. [    0.764000] serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
  123. [    0.796000] serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
  124. [    0.852000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
  125. [    0.884000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
  126. .[    0.900000] bcm47xx_pflash: flash init: 0x1c000000 0x02000000
  127. .[    0.908000] Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022a8
  128. .[    0.920000] Amd/Fujitsu Extended Query Table at 0x0040
  129. .[    0.924000]   Amd/Fujitsu Extended Query version 1.1.
  130. .[    0.932000] number of CFI chips: 1
  131. .[    0.932000] bcm47xx_pflash: Flash device: 0x2000000 at 0x1fc00000
  132. .[    0.940000] bcm47xx_part: bootloader size: 262144
  133. .[    0.948000] bcm47xx_part: Looking for dual image
  134. .[    0.956000] bcm47xx_part: TRX offset : 0
  135. .[    0.960000] 4 bcm47xx partitions found on MTD device Physically mapped flash
  136. .[    0.968000] Creating 4 MTD partitions on "Physically mapped flash":
  137. .[    0.972000] 0x000000000000-0x000000040000 : "cfe"
  138. .[    0.988000] 0x000000040000-0x0000003f0000 : "linux"
  139. .[    1.004000] 0x000000133c00-0x0000003f0000 : "rootfs"
  140. .[    1.008000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  141. .[    1.032000] mtd: partition "rootfs" set to be root filesystem
  142. [    1.036000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=E0000
  143. [    1.044000] 0x000000310000-0x0000003f0000 : "rootfs_data"
  144. [    1.060000] 0x0000003f0000-0x000000400000 : "nvram"
  145. [    1.080000] bcm47xx_sflash: error registering platform driver: -19
  146. [    1.092000] bcm47xx_nflash: error registering platform driver: -19
  147. [    1.100000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
  148. [    1.112000] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:13:d4:92:07:dc
  149. [    1.124000] BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
  150. [    1.136000] TCP cubic registered
  151. [    1.140000] NET: Registered protocol family 17
  152. [    1.144000] Bridge firewalling registered
  153. [    1.148000] 8021q: 802.1Q VLAN Support v1.8
  154. [    1.172000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  155. [    1.184000] Freeing unused kernel memory: 168k freed
  156. [    6.344000] diag: Detected 'ASUS WL-500g Deluxe'
  157. [    6.436000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
  158. [    6.444000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
  159. [    7.688000] roboswitch: Probing device eth0: found a 5325!
  160. - preinit -
  161. Press the [f] key and hit [enter] to enter failsafe mode
  162. - regular preinit -
  163. [   16.116000] JFFS2 notice: (346) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 8 of xref (0 dead, 4 orphan) found.
  164. switching to jffs2
  165. - init -
  166. [   16.860000] b44 ssb0:0: eth0: powering down PHY

  168. .Please press Enter to activate this console. [   23.088000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
  169. [   23.096000] Backport based on wireless-testing.git master-2012-09-07
  170. [   23.104000] compat.git: wireless-testing.git
  171. [   23.200000] cfg80211: Calling CRDA to update world regulatory domain
  172. .[   23.204000] cfg80211: World regulatory domain updated:
  173. .[   23.212000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  174. .[   23.220000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  175. .[   23.228000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  176. .[   23.236000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  177. [   23.244000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  178. [   23.252000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  179. [   24.636000] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
  180. [   24.668000] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
  181. [   24.696000] Broadcom 43xx driver loaded [ Features: PNL ]
  182. [   24.804000] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
  183. [   25.488000] PPP generic driver version 2.4.2
  184. [   26.344000] ip_tables: (C) 2000-2006 Netfilter Core Team
  185. [   26.908000] NET: Registered protocol family 24
  186. [   26.980000] nf_conntrack version 0.5.0 (457 buckets, 1828 max)
  187. [   33.804000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
  188. [   33.808000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
  189. [   41.612000] b44 ssb0:0: eth0: powering down PHY
  190. [   41.652000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
  191. [   41.656000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
  192. [   41.700000] device eth0.0 entered promiscuous mode
  193. [   41.708000] device eth0 entered promiscuous mode
  194. [   41.720000] br-lan: port 1(eth0.0) entered forwarding state
  195. [   41.724000] br-lan: port 1(eth0.0) entered forwarding state
  196. [   43.728000] br-lan: port 1(eth0.0) entered forwarding state
  197. [   45.828000] cfg80211: Calling CRDA for country: TW
  198. [   45.832000] cfg80211: Regulatory domain changed to country: TW
  199. [   45.840000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  200. [   45.848000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  201. [   45.856000] cfg80211:   (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  202. [   45.864000] cfg80211:   (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  203. [   57.596000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  204. [   57.812000] device wlan0 entered promiscuous mode
  205. [   57.968000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  206. [   60.480000] br-lan: port 2(wlan0) entered forwarding state
  207. [   60.484000] br-lan: port 2(wlan0) entered forwarding state
  208. [   62.488000] br-lan: port 2(wlan0) entered forwarding state
  209. [  248.304000] br-lan: port 2(wlan0) entered disabled state
  210. [  248.308000] br-lan: port 1(eth0.0) entered disabled state
  211. [  248.332000] device eth0.0 left promiscuous mode
  212. [  248.336000] device eth0 left promiscuous mode
  213. [  248.344000] br-lan: port 1(eth0.0) entered disabled state
  214. [  248.396000] device wlan0 left promiscuous mode
  215. [  248.400000] br-lan: port 2(wlan0) entered disabled state
  216. [  248.632000] device eth0.0 entered promiscuous mode
  217. [  248.636000] device eth0 entered promiscuous mode
  218. [  248.672000] device wlan0 entered promiscuous mode
  219. [  248.688000] br-lan: port 2(wlan0) entered forwarding state
  220. [  248.692000] br-lan: port 2(wlan0) entered forwarding state
  221. [  248.700000] br-lan: port 1(eth0.0) entered forwarding state
  222. [  248.704000] br-lan: port 1(eth0.0) entered forwarding state
  223. [  250.696000] br-lan: port 2(wlan0) entered forwarding state
  224. [  250.708000] br-lan: port 1(eth0.0) entered forwarding state
  225. [  251.768000] device wlan0 left promiscuous mode
  226. [  251.772000] br-lan: port 2(wlan0) entered disabled state
  227. [  262.744000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  228. [  262.964000] device wlan0 entered promiscuous mode
  229. [  263.128000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  230. [  266.024000] br-lan: port 2(wlan0) entered forwarding state
  231. [  266.032000] br-lan: port 2(wlan0) entered forwarding state
  232. [  268.036000] br-lan: port 2(wlan0) entered forwarding state
  233. telnettelnettelnet 192.168.1.1telnet 192.168.1.1hellohellohellohello..
  234. .
  235. .CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
  236. .Build Date: 二  3月  1 16:49:41 CST 2005 (root@PaNLinux)

  238. .pyright (C) 2000,2001,2002,2003 Broadcom Corporation.

  240. .
  241. .itializing Arena.

  243. .itializing Devices.

  245. .0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 1.3.2.0

  247. .dis0: Broadcom USB RNDIS Network Adapter (P-t-P)

  249. .U type 0x29007: 200MHz

  251. .tal memory: 0x2000000 bytes (32MB)

  253. .
  254. .tal memory used by CFE:  0x80300000 - 0x80436F10 (1273616)

  256. .itialized Data:          0x803313D0 - 0x80333760 (9104)

  258. .S Area:                  0x80333760 - 0x80334F10 (6064)

  260. .cal Heap:                0x80334F10 - 0x80434F10 (1048576)

  262. .ack Area:                0x80434F10 - 0x80436F10 (8192)

  264. .xt (code) segment:       0x80300000 - 0x803313D0 (201680)

  266. .ot area (physical):      0x00437000 - 0x00477000
  267. .Relocation Factor:         I:00000000 - D:00000000
  268. .
  269. .Device eth0:  hwaddr 00-13-D4-92-07-DC, ipaddr 192.168.1.1, mask 255.255.255.0
  270.         gateway not set, nameserver not set
  271. Rescue Flag disable.
  272. Reading :: TFTP Server.
  273. Failed.: Timeout occured
  274. .Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
  275. .Loading: .. 3780 bytes read
  276. .Entry at 0x80001000
  277. .Closing network.
  278. Starting program at 0x80001000
  279. [    0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Mar 23 16:01:31 UTC 2013
  280. .[    0.000000] CPU revision is: 00029007 (Broadcom BMIPS3300)
  281. .[    0.000000] bcm47xx: using ssb bus
  282. .[    0.000000] ssb: Found chip with id 0x5365, rev 0x01 and package 0x00
  283. .[    0.000000] ssb: chipcommon status is 0x0
  284. .[    0.000000] ssb: Initializing MIPS core...
  285. .[    0.000000] ssb: set_irq: core 0x0806, irq 4 => 4
  286. .[    0.000000] ssb: set_irq: core 0x080b, irq 5 => 2
  287. .[    0.000000] ssb: set_irq: core 0x0804, irq 2 => 5
  288. .[    0.000000] ssb: after irq reconfiguration
  289. .[    0.000000] ssb: core 0x0800, irq : 2(S)  3* 4  5  6  D  I
  290. .[    0.000000] ssb: core 0x0806, irq : 2(S)  3  4* 5  6  D  I
  291. .[    0.000000] ssb: core 0x080b, irq : 2(S)* 3  4  5  6  D  I
  292. .[    0.000000] ssb: core 0x0808, irq : 2(S)  3  4  5  6* D  I
  293. .[    0.000000] ssb: core 0x0804, irq : 2(S)  3  4  5* 6  D  I
  294. .[    0.000000] ssb: core 0x0816, irq : 2(S)* 3  4  5  6  D  I
  295. .[    0.000000] ssb: core 0x080f, irq : 2(S)  3  4  5  6  D  I*
  296. .[    0.000000] found parallel flash.
  297. .[    0.000000] can not parse nvram name (null)boardtype(null) with value bcm95365r got -22
  298. .[    0.000000] can not parse nvram name (null)boardtype(null) with value bcm95365r got -22
  299. .[    0.000000] Unsupported SPROM revision 0 detected. Will extract v1
  300. .[    0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000
  301. .[    0.000000] gpiochip_add: registered GPIOs 0 to 15 on device: bcm47xx
  302. .[    0.000000] Determined physical RAM map:
  303. .[    0.000000]  memory: 02000000 @ 00000000 (usable)
  304. .[    0.000000] Initrd not found or empty - disabling initrd
  305. .[    0.000000] Zone PFN ranges:
  306. .[    0.000000]   Normal   0x00000000 -> 0x00002000
  307. .[    0.000000] Movable zone start PFN for each node
  308. .[    0.000000] Early memory PFN ranges
  309. .[    0.000000]     0: 0x00000000 -> 0x00002000
  310. .[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
  311. .[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  312. .[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  313. .[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  314. .[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  315. .[    0.000000] Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes.
  316. .[    0.000000] Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes
  317. .[    0.000000] Memory: 29100k/32768k available (2540k kernel code, 3668k reserved, 379k data, 168k init, 0k highmem)
  318. .[    0.000000] NR_IRQS:128
  319. .[    0.000000] console [ttyS0] enabled
  320. .[    0.004000] Calibrating delay loop... 197.63 BogoMIPS (lpj=395264)
  321. .[    0.044000] pid_max: default: 32768 minimum: 301
  322. .[    0.048000] Mount-cache hash table entries: 512
  323. .[    0.060000] NET: Registered protocol family 16
  324. [    0.124000] bio: create slab <bio-0> at 0
  325. [    0.144000] Switching to clocksource MIPS
  326. [    0.168000] ssb: PCIcore in host mode found
  327. [    0.484000] PCI host bridge to bus 0000:00
  328. [    0.488000] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff]
  329. [    0.496000] pci_bus 0000:00: root bus resource [io  0x0100-0x07ff]
  330. [    0.504000] PCI: Fixing up bridge 0000:00:00.0
  331. [    0.508000] PCI: Fixing up device 0000:00:00.0
  332. [    0.512000] PCI: Fixing latency timer of device 0000:00:00.0 to 168
  333. [    0.532000] pci 0000:00:03.0: BAR 0: assigned [mem 0x40000000-0x40001fff]
  334. .[    0.540000] pci 0000:00:02.2: BAR 0: assigned [mem 0x40002000-0x400020ff]
  335. .[    0.548000] pci 0000:00:02.0: BAR 4: assigned [io  0x0400-0x041f]
  336. .[    0.552000] pci 0000:00:02.1: BAR 4: assigned [io  0x0420-0x043f]
  337. .[    0.568000] PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
  338. .[    0.572000] PCI: Fixing up device 0000:00:03.0
  339. .[    0.580000] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00
  340. [    0.588000] ssb: chipcommon status is 0x0
  341. [    0.592000] ssb: SPROM offset is 0x1000
  342. [    0.604000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:03.0
  343. [    0.616000] NET: Registered protocol family 2
  344. [    0.624000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  345. [    0.632000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  346. [    0.640000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  347. [    0.648000] TCP: Hash tables configured (established 1024 bind 1024)
  348. [    0.652000] TCP reno registered
  349. [    0.656000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  350. [    0.664000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  351. [    0.672000] NET: Registered protocol family 1
  352. [    0.692000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  353. [    0.700000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  354. [    0.712000] msgmni has been set to 56
  355. [    0.716000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  356. [    0.724000] io scheduler noop registered
  357. [    0.728000] io scheduler deadline registered (default)
  358. [    0.736000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  359. [    0.764000] serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
  360. [    0.796000] serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
  361. [    0.852000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
  362. [    0.884000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
  363. .[    0.900000] bcm47xx_pflash: flash init: 0x1c000000 0x02000000
  364. .[    0.908000] Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022a8
  365. .[    0.920000] Amd/Fujitsu Extended Query Table at 0x0040
  366. .[    0.924000]   Amd/Fujitsu Extended Query version 1.1.
  367. .[    0.932000] number of CFI chips: 1
  368. .[    0.932000] bcm47xx_pflash: Flash device: 0x2000000 at 0x1fc00000
  369. .[    0.940000] bcm47xx_part: bootloader size: 262144
  370. .[    0.948000] bcm47xx_part: Looking for dual image
  371. .[    0.956000] bcm47xx_part: TRX offset : 0
  372. .[    0.960000] 4 bcm47xx partitions found on MTD device Physically mapped flash
  373. .[    0.968000] Creating 4 MTD partitions on "Physically mapped flash":
  374. .[    0.972000] 0x000000000000-0x000000040000 : "cfe"
  375. .[    0.988000] 0x000000040000-0x0000003f0000 : "linux"
  376. .[    1.004000] 0x000000133c00-0x0000003f0000 : "rootfs"
  377. .[    1.008000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  378. .[    1.032000] mtd: partition "rootfs" set to be root filesystem
  379. [    1.036000] mtd: partition "rootfs_data" created automatically, ofs=310000, len=E0000
  380. [    1.044000] 0x000000310000-0x0000003f0000 : "rootfs_data"
  381. [    1.060000] 0x0000003f0000-0x000000400000 : "nvram"
  382. [    1.080000] bcm47xx_sflash: error registering platform driver: -19
  383. .[    1.092000] bcm47xx_nflash: error registering platform driver: -19
  384. .[    1.100000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
  385. .[    1.112000] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:13:d4:92:07:dc
  386. .[    1.124000] BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
  387. .[    1.136000] TCP cubic registered
  388. .[    1.140000] NET: Registered protocol family 17
  389. [    1.144000] Bridge firewalling registered
  390. [    1.148000] 8021q: 802.1Q VLAN Support v1.8
  391. [    1.172000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  392. [    1.184000] Freeing unused kernel memory: 168k freed
  393. [    6.332000] diag: Detected 'ASUS WL-500g Deluxe'
  394. [    6.424000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
  395. [    6.432000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
  396. [    7.668000] roboswitch: Probing device eth0: found a 5325!
  397. - preinit -
  398. Press the [f] key and hit [enter] to enter failsafe mode
  399. - regular preinit -
  400. [   16.064000] JFFS2 notice: (346) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 8 of xref (0 dead, 4 orphan) found.
  401. switching to jffs2
  402. - init -
  403. [   16.800000] b44 ssb0:0: eth0: powering down PHY

  405. .Please press Enter to activate this console. [   23.036000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
  406. [   23.044000] Backport based on wireless-testing.git master-2012-09-07
  407. [   23.048000] compat.git: wireless-testing.git
  408. [   23.148000] cfg80211: Calling CRDA to update world regulatory domain
  409. .[   23.152000] cfg80211: World regulatory domain updated:
  410. .[   23.160000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  411. .[   23.168000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  412. .[   23.176000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  413. [   23.184000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  414. [   23.192000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  415. [   23.200000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  416. [   24.584000] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
  417. [   24.616000] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
  418. [   24.644000] Broadcom 43xx driver loaded [ Features: PNL ]
  419. [   24.780000] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
  420. [   25.464000] PPP generic driver version 2.4.2
  421. [   26.160000] ip_tables: (C) 2000-2006 Netfilter Core Team
  422. [   26.864000] NET: Registered protocol family 24
  423. [   26.936000] nf_conntrack version 0.5.0 (457 buckets, 1828 max)
  424. [   33.880000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
  425. [   33.884000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
  426. [   41.220000] b44 ssb0:0: eth0: powering down PHY
  427. [   41.272000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
  428. [   41.276000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
  429. [   41.344000] device eth0.0 entered promiscuous mode
  430. [   41.352000] device eth0 entered promiscuous mode
  431. [   41.376000] br-lan: port 1(eth0.0) entered forwarding state
  432. [   41.380000] br-lan: port 1(eth0.0) entered forwarding state
  433. [   43.384000] br-lan: port 1(eth0.0) entered forwarding state
  434. [   45.860000] cfg80211: Calling CRDA for country: TW
  435. .[   45.864000] cfg80211: Regulatory domain changed to country: TW
  436. .[   45.872000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  437. .[   45.880000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  438. .[   45.888000] cfg80211:   (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  439. .[   45.896000] cfg80211:   (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  440. [   55.084000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  441. [   55.284000] device wlan0 entered promiscuous mode
  442. [   55.440000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  443. [   58.088000] br-lan: port 2(wlan0) entered forwarding state
  444. [   58.092000] br-lan: port 2(wlan0) entered forwarding state
  445. [   60.096000] br-lan: port 2(wlan0) entered forwarding state
  446. [ 1038.856000] device wlan0 left promiscuous mode
  447. [ 1038.860000] br-lan: port 2(wlan0) entered disabled state
  448. [ 1058.532000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  449. [ 1058.808000] device wlan0 entered promiscuous mode
  450. [ 1059.000000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  451. [ 1063.060000] br-lan: port 2(wlan0) entered forwarding state
  452. [ 1063.064000] br-lan: port 2(wlan0) entered forwarding state
  453. [ 1065.068000] br-lan: port 2(wlan0) entered forwarding state
  454. [ 1289.840000] usbcore: registered new interface driver usbfs
  455. [ 1289.844000] usbcore: registered new interface driver hub
  456. [ 1289.860000] usbcore: registered new device driver usb
  457. [ 1290.440000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  458. [ 1290.448000] PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
  459. [ 1290.456000] PCI: Fixing up device 0000:00:02.2
  460. [ 1290.460000] ehci_hcd 0000:00:02.2: EHCI Host Controller
  461. [ 1290.468000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
  462. [ 1290.476000] ehci_hcd 0000:00:02.2: irq 5, io mem 0x40002000
  463. [ 1290.492000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
  464. [ 1290.500000] hub 1-0:1.0: USB hub found
  465. [ 1290.504000] hub 1-0:1.0: 4 ports detected
  466. [ 1323.568000] uhci_hcd: USB Universal Host Controller Interface driver
  467. .[ 1323.576000] PCI: Enabling device 0000:00:02.0 (0000 -> 0001)
  468. .[ 1323.580000] PCI: Fixing up device 0000:00:02.0
  469. .[ 1323.584000] uhci_hcd 0000:00:02.0: UHCI Host Controller
  470. .[ 1323.592000] uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
  471. .[ 1323.600000] uhci_hcd 0000:00:02.0: irq 5, io base 0x00000400
  472. .[ 1323.608000] hub 2-0:1.0: USB hub found
  473. .[ 1323.612000] hub 2-0:1.0: 2 ports detected
  474. .[ 1323.620000] PCI: Enabling device 0000:00:02.1 (0000 -> 0001)
  475. .[ 1323.624000] PCI: Fixing up device 0000:00:02.1
  476. .[ 1323.632000] uhci_hcd 0000:00:02.1: UHCI Host Controller
  477. [ 1323.636000] uhci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
  478. [ 1323.644000] uhci_hcd 0000:00:02.1: irq 5, io base 0x00000420
  479. [ 1323.656000] hub 3-0:1.0: USB hub found
  480. [ 1323.660000] hub 3-0:1.0: 2 ports detected
  481. [ 1399.732000] usbcore: registered new interface driver cdc_acm
  482. [ 1399.736000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  483. [ 3270.976000] sched: RT throttling activated
  484. [13567.000000] usb 2-2: new full-speed USB device number 2 using uhci_hcd
  485. [13569.628000] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
複製代碼
附件: 您需要登錄才可以下載或查看附件。沒有帳號？註冊
收藏 分享

0

lazyfai

Rank: 3Rank: 3Rank: 3
2#
發表於 2014-7-13 22:49 | 只看該作者
我記得有方法將 rootfs 放入USB/SD或者加多個partition 畀佢, 你搵下~

TOP

返回列表