[開箱] 聲菲爾MT300 到手

估唔到集運咁快,放工前約五點收到sms, 衝左番屋企攞。造工唔錯,我聽一首歌,感覺就係超高分析力。 其他聽感,聽日或晏啲先分享。要認真聽下先。 大家睇下圖先,個插頭有lock ,好有誠意。
PSX_20200529_190746.jpg
PSX_20200529_190825.jpg
PSX_20200529_190833.jpg
PSX_20200529_190841.jpg

估唔到集運咁快,放工前約五點收到sms, 衝左番屋企攞。造工唔錯,我聽一首歌,感覺就係超高分析力。 其他聽 ...
soundlover 發表於 2020-5-29 19:17



    下底好似仲有層

TOP

回覆 2# 天大笑話

哈哈係喎,淨係掛住隻耳機,冇睇得咁仔細
PSX_20200529_200324.jpg

TOP

有無試過普通mmcx可唔可以用到??

via HKEPC IR Pro 3.6.1 - Android(3.3.1)

TOP

本帖最後由 pallee 於 2020-5-29 20:44 編輯

I find one issue. At first, MT300 is quoted 120 dB/mW. It is incorrect on the unit (typing mistake ?). It should be dB/V.

On the box, it is written 105 dB (= 120 dB/V at 32 ohm). I think it is the correct value of MT300 sensitivity.

At 32 ohm,

120 dB/mW = 135 dB/V (It is a super high sensitivity spec. Most headphones cannot attain this value. Only premium headphones using real static drivers can)

105 dB/mW = 120 dB/V (This value is more realistic. Many headphones can do this)

Someone can ask Senfer to correct the spec. unit on Taobao page. Every 3 dB means a double of sound pressure per volt. The difference is too big (especially on small signal playback). Manufacturer should be more serious on the spec. quoted.

TOP

回覆 4# qoolight


    我買之前都有呢個問題 問左賣家 佢話同其他mmcx 頭兼容到 唔使擔心

TOP

I find one issue. At first, MT300 is quoted 120 dB/mW. It is incorrect on the unit (typing mistake ? ...
pallee 發表於 2020-5-29 20:20


If u can translate this in Chinese, I can tell the manufacturer about. Tbh, I am not so familiar with the problem u mentioned. I am afraid I will tell the wrong thing to the manufacturer

TOP

本帖最後由 pallee 於 2020-5-29 21:01 編輯

回覆 7# 天大笑話

請廠家把首頁上靈敏度單位更正為 dB/V

現時寫的數值太夸張了, 不太可信

希望只是一時手誤

TOP

回覆 8# pallee
Ok I'll tell him

TOP

隻機幾靚仔

TOP