Help, How to fix GSmartControl Error Log​

control1

Harddisk壞了嗎？
還是重新format可解決？
以下是GSmartControl 的 Error Log, 但我不太懂

Complete error log:

SMART Error Log Version: 1
ATA Error Count: 184 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 184 occurred at disk power-on lifetime: 696 hours (29 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 98 6f 8f ff 40  Error: ICRC, ABRT at LBA = 0x00ff8f6f = 16748399

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 b8 58 cd 1d 40 00      03:23:09.847  WRITE FPDMA QUEUED
  61 08 b0 80 0e 00 40 00      03:23:09.847  WRITE FPDMA QUEUED
  61 08 a8 c0 0e 00 40 00      03:23:09.847  WRITE FPDMA QUEUED
  61 08 a0 c8 d7 1a 40 00      03:23:09.847  WRITE FPDMA QUEUED
  61 08 98 68 8f ff 40 00      03:23:09.847  WRITE FPDMA QUEUED

Error 183 occurred at disk power-on lifetime: 696 hours (29 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 58 5f cd 1d 40  Error: ICRC, ABRT at LBA = 0x001dcd5f = 1953119

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 78 68 8f ff 40 00      03:23:09.283  WRITE FPDMA QUEUED
  61 08 70 c8 d7 1a 40 00      03:23:09.283  WRITE FPDMA QUEUED
  61 08 68 c0 0e 00 40 00      03:23:09.283  WRITE FPDMA QUEUED
  61 08 60 80 0e 00 40 00      03:23:09.283  WRITE FPDMA QUEUED
  61 08 58 58 cd 1d 40 00      03:23:09.283  WRITE FPDMA QUEUED

Error 182 occurred at disk power-on lifetime: 696 hours (29 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 18 6f 8f ff 40  Error: ICRC, ABRT at LBA = 0x00ff8f6f = 16748399

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 38 58 cd 1d 40 00      03:23:08.719  WRITE FPDMA QUEUED
  61 08 30 80 0e 00 40 00      03:23:08.719  WRITE FPDMA QUEUED
  61 08 28 c0 0e 00 40 00      03:23:08.719  WRITE FPDMA QUEUED
  61 08 20 c8 d7 1a 40 00      03:23:08.719  WRITE FPDMA QUEUED
  61 08 18 68 8f ff 40 00      03:23:08.719  WRITE FPDMA QUEUED

Error 181 occurred at disk power-on lifetime: 696 hours (29 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 d0 5f cd 1d 40  Error: ICRC, ABRT at LBA = 0x001dcd5f = 1953119

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 f0 68 8f ff 40 00      03:23:08.155  WRITE FPDMA QUEUED
  61 08 e8 c8 d7 1a 40 00      03:23:08.155  WRITE FPDMA QUEUED
  61 08 e0 c0 0e 00 40 00      03:23:08.155  WRITE FPDMA QUEUED
  61 08 d8 80 0e 00 40 00      03:23:08.155  WRITE FPDMA QUEUED
  61 08 d0 58 cd 1d 40 00      03:23:08.155  WRITE FPDMA QUEUED

Error 180 occurred at disk power-on lifetime: 696 hours (29 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 90 6f 8f ff 40  Error: ICRC, ABRT at LBA = 0x00ff8f6f = 16748399

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 b0 58 cd 1d 40 00      03:23:07.591  WRITE FPDMA QUEUED
  61 08 a8 80 0e 00 40 00      03:23:07.591  WRITE FPDMA QUEUED
  61 08 a0 c0 0e 00 40 00      03:23:07.591  WRITE FPDMA QUEUED
  61 08 98 c8 d7 1a 40 00      03:23:07.591  WRITE FPDMA QUEUED
  61 08 90 68 8f ff 40 00      03:23:07.591  WRITE FPDMA QUEUED