分享一下近排xcube打的野！

ansion

好耐无上尼同大家倾计了！（夜晚晚甘讲好似果D野甘），贴D近排打的野，后面的戒指系可铸造的，送左去铸造厂了，睇下铸出尼乜野效果！

下載 (114.94 KB)

2017-5-25 01:52

Printer: X-Cube 30W
Resin: X-Cube + 0.2% GRAY
Slicer: Creation Workshop
support：B9+Magics
Size:  
Slice Height (mm) : 0.025
Exposure Time For First Layers (ms): 50000
Bottom Layers:4
Exposure Time (ms): 8000
Lift Speed (mm/m): 25 + 40
Z Lift Distance (mm): 4

下載 (107.3 KB)

2017-5-25 01:52

Printer: X-Cube 30W
Resin: X-Cube + 0.2% GRAY
Slicer: Creation Workshopsupport：B9
Size:  
Slice Height (mm) : 0.05
Exposure Time For First Layers (ms): 50000
Bottom Layers: 4
Exposure Time (ms): 8000
Lift Speed (mm/m): 25 + 40
Z Lift Distance (mm): 4

下載 (132.55 KB)

2017-5-25 02:05

Printer: X-Cube 30W
Resin: X-Cube + 0.1% GRAY
Slicer: Creation Workshop
support：
Size:  
Slice Height (mm) : 0.05
Exposure Time For First Layers (ms): 50000
Bottom Layers:4
Exposure Time (ms): 10000
Lift Speed (mm/m): 25 + 40
Z Lift Distance (mm): 4

下載 (86.43 KB)

2017-5-25 02:03

Printer: X-Cube 30W
Resin: X-Cube Clear Yellow
Slicer: Creation Workshop
support：
Size:  
Slice Height (mm) : 0.1
Exposure Time For First Layers (ms): 50000
Bottom Layers:4
Exposure Time (ms): 12000
Lift Speed (mm/m): 25 + 40
Z Lift Distance (mm): 4

下載 (106.85 KB)

2017-5-25 02:03

Printer: X-Cube 30W
Resin: X-Cube Clear Yellow
Slicer: Creation Workshop
support：
Size:  
Slice Height (mm) : 0.05
Exposure Time For First Layers (ms): 50000
Bottom Layers:4
Exposure Time (ms): 10000
Lift Speed (mm/m): 25 + 40
Z Lift Distance (mm): 4

下載 (90.06 KB)

2017-5-25 02:03

城堡
Printer: X-Cube 30W
Resin: X-Cube Clear Yellow
Slicer: Creation Workshop
support：
Size:  
Slice Height (mm) : 0.1
Exposure Time For First Layers (ms): 50000
Bottom Layers:4
Exposure Time (ms): 10000
Lift Speed (mm/m): 25 + 40
Z Lift Distance (mm): 4

下載 (69.42 KB)

2017-5-25 01:52

Printer: X-Cube 50W
Resin: DLP 可铸造树脂
Slicer: Creation Workshop
support： Creation Workshop
Size:  
Slice Height (mm) : 0.05
Exposure Time For First Layers (ms): 50000
Bottom Layers:4
Exposure Time (ms): 15000
Lift Speed (mm/m): 25 + 40
Z Lift Distance (mm): 4

Super169

海寧老板 終於又在 HKEPC出現了, 可唔可以放D模型既 3D 檔出黎, 比我地試下用自己部機印黎睇下?

在QQ群見你地都研究左唔同既方案去改善打印效果, 國內亦早已有 50W 的升級選項.  甚至聽聞國內既朋友, 寄左部機番廠比你地升級 (好似係升級 玻璃 同 燈).

我地由香港寄部機番上去比較困難, 自己帶過關都唔知得唔得, 唔知會唔會出升級套件, 比我地自己攪呢?  雖然我自己唔掂, 但我有D朋友攪開硬件既, 好有興趣自己換黎試下.

另外, 係咪出左新既樹脂呢?  唔知同家陣果隻有幾大分別?  你上面既作品, 可唔可以好似 Offer 個貼咁, 出埋 setting 比我地參考, 跟你學習下.

Printer: X-Cube 30W
Resin: X-Cube + 0.2% Green
Slicer: Creation Workshop
Size: 17.52 x 10.76 x 28.23
Slice Height (mm) : 0.05
Exposure Time For First Layers (ms): 80000
Exposure Time (ms): 8000
Lift Speed (mm/m): 25 + 50
Z Lift Distance (mm):10 + 6

希望大大多D過黎, 照顧一下香港既用家, 同我地講下  X-Cube 既進展, 唔駛我地四圍去八.

ansion

回覆 2# Super169

X-cube会有一个升级版，现在还有测试阶段，到时候也会考虑前面的客户，有兴趣的可以做一个升级。

ansion

下載 (49.65 KB)

2017-5-27 15:58

可铸造树脂铸造的金戒指，基本上达到了铸造的要求，熔蜡的温度还需要调整一下。

ansion

下載 (95.63 KB)

2017-5-27 16:48

普通的树脂都可以铸造的，只不过效果无甘好。

ansion

下載 (118.4 KB)

2017-7-8 13:45

下載 (134.37 KB)

2017-7-8 13:45

近期一直忙于其他事情，少上左HKEPC，忙完左大学的一个项目后，现在开始做x-cube的升级和大尺寸版本的开发工作，现在新的Z轴已经做出来，验证没有问题将开模具制作新的Z轴，对于EPC上团购的朋友我们都会提供一个优惠的升级方案。

ansion

下載 (122.91 KB)

2017-7-8 13:52

Printer: X-Cube 30W
Resin: X-Cube Gray
Slicer: Creation Workshop
support：
Size:  
Slice Height (mm) : 0.025
Exposure Time For First Layers (ms): 50000
Bottom Layers:4
Exposure Time (ms): 12000
Lift Speed (mm/m): 30 + 50
Z Lift Distance (mm): 8

下載 (112.19 KB)

2017-7-8 13:52

Printer: X-Cube 30W
Resin: X-Cube Gray
Slicer: Creation Workshop
support：
Size:  
Slice Height (mm) : 0.025
Exposure Time For First Layers (ms): 50000
Bottom Layers:4
Exposure Time (ms): 12000
Lift Speed (mm/m): 25 +5 0
Z Lift Distance (mm): 8

下載 (137.09 KB)

2017-7-8 13:52

qkuser

有升級一定支持,希望價格親民點

ustkl

回覆 6# ansion

双直線導軌,  滾珠絲桿。

其實早應這樣, 光固機不應在Z軸上cut cost.

Super169

近期一直忙于其他事情，少上左HKEPC，忙完左大学的一个项目后，现在开始做x-cube的升级和大尺寸版本的开 ...
ansion 發表於 2017-7-8 13:48

新既 Z 支架咁似部 CNC 既用料既, 除左個彈性聯軸簡單左D.
都玩到咁大了, 差少少錢, 不如換埋 梅花聯軸, 或者彈性夾膜既.