問散熱排安裝位置

roid2000

回覆 1# calebchik

一般情況建議都係裝頂或尾部較好，風向亦以吹出效果最佳。當然每個機箱情況不一樣，不如你比多D資料大家研判下

roid2000

回覆 3# calebchik

裝底一來冇咁好睇，二來走管唔方便，最後就係裝係後面，將14CM裝下面，攪掂

chining0923

裝後面+1，將熱風吹去後面點都好過裝下面，同埋好睇少少

via HKEPC Ionic Reader v1.4.2 - iPhone

erinnerung

冷排一般裝抽出位.
抽入位冷卻效果係高d, 不過機箱內部溫度會比較高...

chining0923

回覆  chining0923

多謝各位ching意見，會考慮裝係後面，但有冇D比較新款的14CM一體水冷可以介紹呢? ...
calebchik 發表於 2016-12-6 15:02

   
12&14cm 一體水其實同風冷差唔多，一超少少都唔夠力，不如你買隻280用番你d新風扇仲靚仔啦

via HKEPC Ionic Reader v1.4.2 - iPhone

shimanong

回覆  chining0923

都可以，咁有冇D"280"可以介紹下? 最好不要太舊款的。
calebchik 發表於 2016-12-6 17:56

https://www.ekwb.com/shop/ek-xlc-predator-280-incl-qdc

EK-XLC Predator 280 (incl. QDC)


不過注意返佢連pump個長度同厚度

Technical specifications:
Dimensions: 335 x 142 x 68mm (L x W x H)
Fan type: EK-Vardar F2-140ER Predator Edition (480-1600rpm)
Tube length: ~400mm (15.75in)
Fitting type: EK-ACF Fitting 10/16mm
QDC type: 10mm barb fitting
Coolant type: EK-Ekoolant EVO Clear
Pump type: EK-SPC 60A
Total liquid capacity: ~320mL

Nominal cooling performance (fans @ 1500rpm):
ΔT=10K: ~358W
ΔT=15K: ~537W

CPU socket compatibility:
- Intel LGA-1150/1151/1155/1156
- Intel LGA-2011(-3)

Optional AMD Socket Upgrade Kit add-on brings further compatibility for the following CPU sockets:
- AMD Sockets: 939, 754, 940
- AMD Sockets: AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+

Enclosed:
- EK-XLC Predator 280 (incl. QDC)
- EK-TIM Ectotherm (1g syringe)
- Main Power and PWM signal cable
- CPU Mounting mechanism
- Installation manual (ENG)

PLEASE NOTE:

Narrow server type LGA-2011 is not supported by default – a Mounting plate Supremacy LGA-2011 Narrow ILM is mandatory to install this water block on narrow server type LGA-2011 motherboards. You will have to disassemble the water block, drain and refill the unit in order to install the block on a narrow server type LGA-2011. EK-Supremacy MX Backplate is to be used only with Intel LGA-115x type motherboards. This product can easily fit AMD socket processors via optional EK-XLC Predator AMD Upgrade Kit.

Additional Info

Material / Design / Color option	Copper Plexi
Threads	G1/4
Prepared for LED Diode	3mm
Sockets	Intel
# of Fans	2