[操作疑難] dell 15-7559 不能進入bios。

du0449

一般開機時都會顯示 dell logo 畫面,此時按 DEL 鍵可進入 BIOS改一些設定,
但是我的電腦卻沒有顯示 dell logo,就直接進入WINDOWS 10開機畫面,不知道是什麼原因?
現在我想更換ssd硬盤重裝win11，但是又進不到 bios設定……希望各位大神幫幫忙。不勝感激。

99819925

進入 BIOS 設定程式
開啟 (或重新啟動) 電腦。
在 POST 期間，當螢幕上顯示 DELL 徽標時，請注意觀察，等候顯示 F2 提示，然後立即按 F2 鍵。

https://www.dell.com/support/man ... 2039&lang=zh-hk

du0449

回覆 1# du0449

多謝回覆
    我的電腦卻沒有顯示 dell logo,直接就進入WINDOWS 10！

du0449

回覆 2# O人


    多謝回覆
可能我講得唔清楚，電腦沒有加外置硬盤和ssd，原來的ssd是系統。

rickywk

REstart 果時按住shift，就有Win10 boot menu，咁就比你選入UEFI firmware settings

du0449

回覆 6# rickywk


    多謝回覆
明天我試試先。

du0449

回覆 8# O人


    多謝回覆
我已經試過都係入唔到bios… F2 F12 Del ESC 全部都按過晒了。

dom

Try this
https://learn.microsoft.com/en-u ... ode?view=windows-11

To boot to UEFI or BIOS:
Open the firmware menus. You can use any of these methods:

Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. On tablets, common buttons are Volume up or Volume down (find more common keys and buttons). During startup, there’s often a screen that mentions the key. If there’s not one, or if the screen goes by too fast to see it, check your manufacturer’s site.

Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power (Power button icon) > hold Shift while selecting Restart. Select Troubleshoot > Advanced options > UEFI Firmware settings.

From the firmware menus, boot to a drive or network while in UEFI or BIOS mode:

On the boot device menu, select the command that identifies both the firmware mode and the device. For example, select UEFI: USB Drive or BIOS: Network/LAN.

You might see separate commands for the same device. For example, you might see UEFI USB Drive and BIOS USB Drive. Each command uses the same device and media, but boots the PC in a different firmware mode.

Some devices only support one mode (either UEFI or BIOS). Other devices will only allow you to boot to BIOS mode by manually disabling the UEFI security features. To disable the security features, go to Security > Secure Boot and disable the feature.