[一般問題] OCZ A3/ V3 firmware 2.50

http://www.ocztechnologyforum.co ... ve-3-RevoDrive-3-X2

Release Notes

Improvements since version 2.25

• Added Enhanced Secure Erase Feature (Behaviour same as standard Secure Erase)
• Fixed a race condition where a write command during the SATA error handling process could cause the drive to hang
• Improve WHCK TRIM performance on Win8
• Improved unsafe shutdown recovery error handling
• Improved power state transitions from PS6 to PS1
• Fixed a timeout issue during SATA error recovery
• Fixed an issue that could hang the self-SMART test
• Fixes issue with SMART Attribute 174 (unexpected power cycle) would still increment after Standby Immediate command was received and drive was power cycled

0

0

張貓貓

中級會員

Rank: 2 Rank: 2

2^#

發表於 2013-9-25 10:40 | 只看該作者

Thanks!!!!!!

TOP

akirabbq

初級會員

Rank: 1

3^#

發表於 2013-10-27 15:23 | 只看該作者

幾個禮拜前Agility 3 240GB上咗2.50, 跟住隻ssd間唔中會響bios list消失, 或者長開Windows後會hang機. ocz已經pull走2.50:

http://www.ocztechnologyforum.co ... ve-3-RevoDrive-3-X2

但已上fw 2.50不能夠downgrade........

完全不能接受, 換走佢依家用緊Samsung 840 Pro 256GB. 永遠blacklist ocz.

TOP

kkchuang

進階會員

Rank: 3 Rank: 3 Rank: 3

4^#

發表於 2013-10-27 16:11 | 只看該作者

之前ocz咁多負面消息....
我買intel/plextor/samsung算...

TOP

akirabbq

初級會員

Rank: 1

5^#

發表於 2013-10-30 23:42 | 只看該作者

仍然未有自行的解決方法. 我用Z77 chipset, 上了2.50的問題:
- 電腦長時間空置時會hang機
- hang機後restart, 或正常restart Windows, SSD會在bios裡面消失

我試到暫時解決的方法:
- 在bios裡將接ocz的SATA port set為hotplug (解決restart後消失問題)
- 在intel RST裡disable個link power management. 如果用MS的achi, 上google search disable link power management.

上ocz official forum, 似乎佢地唔肯認2.50有問題, 只係話仲調查緊. 基本上所有sandforce based的ssd都全部奶野, 都係死響認唔到同hang機情況.

TOP

akirabbq