[教學] [原創]模擬電網保護同監測系統

franklee006

因為都幾長下會分唔同時間上傳, 仲有會幾亂下... 遲下有時間會汁汁
因為本身report 都幾長, 所以我唔post 曬上黎...

我想問大家會唔會mind 我用英文, 如果有時間我再加中文
Summary
The use of an embedded system to monitor, control and protect a power system. Such functions used to be carried out on a
power system by analogue instrumentation but are now being replaced microprocessor based
relay. You will work with a power system simulator that represents the functionality of an 11kV
power system at a reduced level of voltage and current.



Figure 1 – Typical arrangement of an 11kV power system





------------------------- Mock-up system ---------------


-------------------------- Specification -------------------------------

franklee006

----------------------------------- 硬件 -------------------------------
依個係project 內用的 MCU, Model : 18f4520

franklee006

source code

http://rapidshare.com/files/368791792/Test_with_time.c

-------------------------- computer simulation ------------------------


-------------------------- hardware Testing ------------------------------

franklee006

留位3

franklee006

留位4

lamtszhin0528

期待...

kai_lar

支持

whisky1314

期待...
lamtszhin0528 發表於 2010-3-27 21:23

ME2

Offer

留位等學野


BTW,上精華是不用求,寫得好版主會識做的

jackli

本身想幫你譯....
你依家愈寫愈多@@..,.,.,