作者: infernojericho 時間: 2008-11-3 12:13 標題: Question on overclocking AMD 5000+ Black Edition with Asrock A780FullHD
Hi, I recently upgraded my computer with a Asrock A780FullHD, 5000+ Black Edition, and Supertalent 2Gb 800Mhz CL5.
I am well aware the motherboard and RAM are not the best components for overclocking, but what is the maximum that I can overclock?
Currently the maximum I can overclock is by setting the FSB to 220Mhz (Default is 200Mhz), setting anything higher will result in machine reboots and BSODs. Is there anyway I can overclock it higher? Are there settings in the RAM that I can set?
Many thanks!
作者: Respect 時間: 2008-11-3 16:19 標題: 回復 1# 的帖子
If u experience difficulty raising FSB from 220Mhz,
firstly try turning down the HT freq. from 1000Mhz (5X) to 800/600Mhz(4X/3X),
which is sufficient for the use of A64X2 CPUs.
Then set ur RAM freq mode to 667 or 533mode,
and u should aware sometimes it is not ur CPU raised too high freq but the RAM does.
When u overclock ur CPU, the ram also raise its freq at the same time that causes instability.
U should also have a look on the chart below to find the suitable RAM freq. mode with different dividers.

作者: vickhoo 時間: 2008-11-3 16:32
5400+ BE RAM corsair cm2X 1024-6400 1GX2
HT freq 3X
14X /232===>32XX(加電)
不能再上
作者: _恆_ 時間: 2008-11-3 16:34
原帖由 vickhoo 於 2008-11-3 04:32 PM 發表
5400+ BE RAM corsair cm2X 1024-6400 1GX2
HT freq 3X
14X /232===>32XX(加電)
不能再上![]()
差唔多啦,AMD OC 到3.2G 都算幾好啦
作者: kim618 時間: 2008-11-3 17:59
14X /232===>32XX(加電)
不能再上 ?!
我粒 5000+ BE 加電 都上到 3.35G
不過成日俾 D 無謂人 批評浪廢用電 又話 夠用 同 熱
大佬 我粒 U 空冷超完都唔過 36 度
同 之前 D CPU 俾真係... 灰 ~
https://h0.hkepc.com/forum/attachment.php?aid=753889&k=bc69414acbc5e4fe745af6ca6fcbf049&t=1781355386&sid=38c0LfSJEi

作者: Sun 時間: 2008-11-4 12:57
我就鐘意甘玩, 65w-->30w
a780fullhd係降壓好板
full load幾日都好stable
[ 本帖最後由 Sun 於 2008-11-4 13:01 編輯 ]
https://h0.hkepc.com/forum/attachment.php?aid=754251&k=a5dc6bfd6e705f9d68c658ab9ddf0192&t=1781355386&sid=38c0LfSJEi

https://h0.hkepc.com/forum/attachment.php?aid=754252&k=05d2a9526807ed08ed94914e66071201&t=1781355386&sid=38c0LfSJEi



