作者: kenn 時間: 2013-4-15 15:08 標題: 加SAS Expander?
現時Raid card 8個ports已用, 無spare port. 請問除了加sas expander外(因想用回cachecade pro 2.0), 有冇其他方法？
SAS expander 約多少錢？有何介紹？
作者: pcm10241024 時間: 2013-4-15 15:14
http://shopping.yahoo.com/819418 ... as-raid-controller/
作者: Dull 時間: 2013-4-15 15:15
現時Raid card 8個ports已用, 無spare port. 請問除了加sas expander外(因想用回cachecade pro 2.0), 有冇 ...
kenn 發表於 2013-4-15 15:08
暫時Expander 都係推介Intel RAID Expander Card RES2SV240，用LSISAS2x24 Expander IC
作者: idolclub 時間: 2013-4-15 15:17
現時Raid card 8個ports已用, 無spare port. 請問除了加sas expander外(因想用回cachecade pro 2.0), 有冇 ...
kenn 發表於 2013-4-15 15:08
Intel RES2SV240 24-Port SAS 6Gbps Expander, about USD250
作者: kenn 時間: 2013-4-15 15:25
請問有冇compatibility problem (LSI 9270)?
本地有賣否？
謝謝。
作者: kenn 時間: 2013-4-15 18:01
本帖最後由 kenn 於 2013-4-15 18:58 編輯
Thanks all C-Hings replied above.
LSI Support sent me a "Compatibility Report for MegaRAID Value and Feature 6Gb/s SAS Controller", which is downloadable from the following link -
http://www.lsi.com/downloads/Public/RAID%20Controllers/RAID%20Controllers%20Common%20Files/MegaRAID_Value_Feature_Interop_List_SAS2.pdf
作者: kenn 時間: 2013-4-15 18:56
(i) Do I need to buy a SF8087 to SF8087 cable to connect the LSI 9270 to the Intel RES2SV240? In this way, I can still make use of the remaining SF8087 port of my raid card to connect 4 SATA drives and connect the other SATA drives to the SF8087 ports of the Intel expander (via appropriate cables), right? or
(ii) Connect the Intel expander with the LSI raid card by 2 SF8087 to SF8087 cables (using two ports of EACH card/expander) and connect up to 16 SATA drives? Any speed difference between the setup of (i) and (ii)?
(iii) My CacheCade Pro 2.0 could still work in both setup?
(iv) What kind of cables are included in the Intel RES2SV240 box?
Thanks in advance.