標題: WD1002FAEX-00Y9A0 ~FIX PATCH SATA2>SATA3 方法 [打印本頁]

---

作者: andyming    時間: 2010-9-6 00:04     標題: WD1002FAEX-00Y9A0 ~FIX PATCH SATA2>SATA3 方法

原文:
:http://community.wdc.com/t5/Desk ... I/td-p/42015/page/2

1. First format you usb key in fat..
Create an usb boot drive with a tool like unetbootin.

Choose FreeDos which is a free MS-DOS version which contains sata drivers.

2. Copy the file "WdSSpd.exe" on it.

3. Shutdown computer

4. Unplug sata3 cable and connect a standart sata cable.

Connect them to a sata2 controller on your motherboard.

5. In the bios, you need to define your sata controller in "enhanced" or "AHCI" mode, not "IDE"

6. Boot on the key, run "Live" mode.

My usb drive was B: so type "cd B:" to access it.

Run WdSSpd.exe and wait

7. Allright, you will see a message which indicate to reboot.

8. If you were in sata "IDE" mode, don't forget to reset it because windows will not boot

---

作者: cs112    時間: 2010-9-6 11:17

有無中文版,睇唔明=.=
早2個月我都買左00Y9A0,依家用你個方法可以轉番做sata3嗎?

---

作者: forget    時間: 2010-9-7 00:43

完全明白..多謝樓主

---

作者: hold_find    時間: 2010-9-7 11:25

打咗俾聯強
拎上去師傅會幫我做update

---

作者: kenn    時間: 2010-9-11 11:29

本帖最後由 kenn 於 2010-9-11 11:37 編輯

Yes.  Just brought the HDD to Synnex and the technician helped me to reset my HDD to run as SATA3.  BIOS detects it as a SATA3 HDD now.

---

作者: dejiko    時間: 2010-9-11 16:47

回復 4# hold_find


    我想問下, 個師傅update完隻野之後, 個firmware係唔係唔同左version?

---

作者: dejiko    時間: 2010-9-11 16:48

回復 1# andyming


    如果手動update, 個firmware version會唔會改左?
我都係00Y9A0, firmware version係01.01V01

---

作者: kenn    時間: 2010-9-11 17:21

I forget the version of the firmware before resetting.  Now its  version is 01.01V01.

[attach]1079554[/attach]

---

作者: gbaxp    時間: 2010-9-11 22:12

隻HARDDISK到底有咩問題?

---

作者: hold_find    時間: 2010-9-11 23:32



咁又唔清楚，我未做update

---

作者: simonhing    時間: 2010-9-13 09:55



請問 update 完 hdd  d 舊 data 有冇影響呢 ?? thx !!

---

作者: kenn    時間: 2010-9-13 16:50

回復 11# simonhing
No problem.  Data remains.