作者: Offer 時間: 2025-3-27 08:01 標題: 拓竹解鎖(未能核實)網上资料
First, you need to login to Bambu Studio via the Bambu Cloud China system. You need to use a Chinese phone number to login because the login password requires an OTP sent as an SMS to a Chinese phone number only. Once you have logged in, you are done.
After logging in, you can immediately add a Chinese version printer and update the firmware.
To steal a session, it is not difficult: copy the Bambu Studio folder to C:\Users\username\AppData\Roaming\BambuStudio (zip the entire folder).
Then, if you want to use another PC or send it to a customer or someone else, just send the zipped file to that customer. Then, the customer or user can extract the file to C:\Users\username\AppData\Roaming
When the customer opens the Bambu Studio program, they will be able to access the Chinese session immediately. Then, they can add the Chinese version printer. Normally, when you add it, it will give an error IOT_ERROR_REGION_LIMITED. But now we are in Chinese User Session, there will be no more problems. We can upgrade the firmware as usual.
We can go back to LAN Mode or go back to Cloud. The Chinese Session does not disappear at all, it is still stuck all the time.
Just like this, everything can be done like a Global machine.
In this case, we can see that we really do not need to pry open any Bambu Studio program. For those who are good at prying, good at Hex Editor, just pry open the file C:\Users\username\AppData\Roaming\BambuStudio\BambuNetworkEngine.conf. If you can pry open this file, the Region Lock issue will be over.
The printer has an Access Code which is an 8-digit number that controls the printer connection anyway. Therefore, to connect the printer, we must enter the Access Code number.
我冇已鎖區大陸版所以未知是否可以
作者: xo_ox 時間: 2025-3-27 09:06
nice news...
try try some times
作者: Offer 時間: 2025-3-27 11:23
nice news...
try try some times
xo_ox 發表於 2025-3-27 09:06
等你包膠
作者: gulakpi 時間: 2025-3-27 18:07
Thank You!
作者: Super169 時間: 2025-3-27 19:44
等睇包膠.
作者: jerrychan0610 時間: 2025-3-31 14:42
會唔會係谷銷量的一個方法.
放水幾個月, 然後又刪大閘, 到時大把人坐艇.
作者: Offer 時間: 2025-3-31 15:29
會唔會係谷銷量的一個方法.
放水幾個月, 然後又刪大閘, 到時大把人坐艇.
jerrychan0610 發表於 2025-3-31 14:42
我用左一年了
作者: hktvro 時間: 2025-3-31 19:24
我用左一年了
Offer 發表於 2025-3-31 15:29
你是v..v...vip
身份不同呀
所以待遇有所不同 !
作者: Offer 時間: 2025-4-1 07:28
你是v..v...vip
身份不同呀
所以待遇有所不同 !
hktvro 發表於 2025-3-31 19:24
淘宝時佢地都吾知買家是誰
作者: jerrychan0610 時間: 2025-5-2 10:52
有無人有包膠?
作者: ptwong 時間: 2025-10-20 16:34
期待緊、就快双11、P2S 能解嗎？
其實香港 大陸 都只係一河之隔、點解香港買野要比貴D？
作者: ts_bum 時間: 2025-10-20 16:51
剛剛入手p2s 等貨中
如果真就入h2d / h2c
H2d 1萬人仔喳
作者: ghost2377 時間: 2025-10-21 21:56
回覆 11# ptwong
因香港有錢人多卦，又可能香港外國人多卦
作者: gulakpi 時間: 2025-10-30 14:11
同樣職位, 點解香港人工高?
作者: 雀雀 時間: 2025-10-31 15:40
同樣職位, 點解香港人工高?
gulakpi 發表於 2025-10-30 14:11
又唔可以咁比喻既, 同樣職位, 但做既野唔同. 但 3D Printer 做既野一樣.
作者: ghost2377 時間: 2025-11-1 19:08
本帖最後由 ghost2377 於 2025-11-1 19:09 編輯
回覆 14# gulakpi
我講的是香港人在香港工作收入比大陸人在大陸工作收入多。
明未?
不是香港人在香港工作收入比外國人在香港工作收入多。
題外話，外國人在香港工作可能真係會比香港人多一堆津貼，話晒人地離鄉別井。