作者: Super169 時間: 2015-4-23 14:32 標題: 呢部機有無得諗?
Tiko - The Unibody 3D Printer
https://www.kickstarter.com/proj ... -unibody-3d-printer
$179 好似幾靚仔, 唔知打印質素如何. $99 果批預期 11 月面世. $179 都排到出年 3 月了.
大家點睇?
作者: ma_hty 時間: 2015-4-23 14:58
回覆 1# Super169
makibox 翻版...
作者: perthchan 時間: 2015-4-23 15:18
3條導軌都食左台機的價錢一半了, 未計主板同牛
作者: ma_hty 時間: 2015-4-23 15:26
本帖最後由 ma_hty 於 2015-4-23 15:33 編輯
回覆 3# perthchan
無導軌, 用膠外殼頂. 比 國產膠轆版kossel 更簡陋.
可真是... 沒有最簡陋, 只有更簡陋.作者: fred2088 時間: 2015-4-23 15:27
回覆 1# Super169
得125直徑, 內丁方只有80在右 ?!
作者: ivan2046 時間: 2015-4-23 15:37
希望有機會開箱吧
作者: Super169 時間: 2015-4-23 16:02
嘩...大家咁唔睇好, 可以唔諗了.
因為個 fd 厭部閃豬機太大, 諗住睇下有無 D 細細部又靚仔既可以毒下佢. 睇黎, 呢部都係唔掂. 都係專心等 TinyBoy 算了.
作者: rhino 時間: 2015-4-23 16:15
本帖最後由 rhino 於 2015-4-23 16:18 編輯
As of now, fund raised up to 2.4M USD!!! The printer will be built in China.
Michael is responsible to technical side of this printer.
[Quote]
Michael was born in China and moved to Canada at age 12. He is fluent in Mandarin and has many connections back home. Michael leverages this, along with his sharp technical skill set, to work with experienced manufacturers without language or technical barriers. This enabled us to find new ways to manufacture Tiko's bespoke parts and push the envelope on Tiko's performance while reducing manufacturing costs.
作者: g2david 時間: 2015-4-23 16:38
Stepper motor direct drive. But I like the machine is neat. No blue tape and else. no tuning.