作者: 大同 時間: 2015-3-17 17:03 標題: Arduino 3D printer Materia 101
http://store.arduino.cc/product/3DP0002
價錢都算合理吾知質量掂吾掂!!
部機就幾靚仔
Color White
Body Stainless steel
Carter Plexiglass
Screen LCD monitor
Minimum layer thickness 0.1 mm
Print Area 140x100x100 mm
Filaments 1.75 mm PLA
Printing technology Fused Filament Fabrication
X & Y resolution 0.06 mm
Z resolution 0.1 mm
PLA suggested temperature 200-230 °C
Suggested support PLA
Experimental support Cristal Flex, PLA termosense, TPU, PET, PLA Sand, PLA Flex
Absorption 65 W
Extra feature 1 Extruder block with pressure adjustment on filament
Extruder (diameter) 0.35mm
Extra feature 2 Bearings recirculating ball on all axes
Extra feature 3 Z axis movement with trapeizoidal screws
Extra feature 4 Adjustable printing bed
Extra feature 5 Micro USB to update the firmware
Extra feature 6 Possibility to print directly from SD card
作者: ivan2046 時間: 2015-3-18 13:08
http://store.arduino.cc/product/3DP0001
自已砌4千6港紙
作者: 大同 時間: 2015-3-18 15:23
回覆 2# ivan2046
arduino 出品點都有保證好過迪亞哥! 4600 比起其他歐美 性價比算高!
不過打印面積細左少少!
歐元又系咁跌可能仲有得平!