作者: siusiu321 時間: 2011-5-17 23:40 標題: SE90 PCI or MD-10?? For HiVi 1080MKII
本帖最後由 siusiu321 於 2011-5-17 23:41 編輯
SE90 PCI or MD-10?? For HiVi 1080MKII. Which one is better??
Mainly for listern APE & Flac. Please help!!
作者: @HIM 時間: 2011-5-18 00:29
MD-10 , 唔洗講嘢
作者: siusiu321 時間: 2011-5-19 00:02
Just online order yesterday, But already send to me today at 5:00pm. (In China)
I Just found that the 1080MKII is not good enough with MD-10
after try it in my friend home!!! My friend config. MD10+Audio Lab AMP--> speaker!!
One question, How long to run-in the MD-10 ??
[attach]1184913[/attach]
[attach]1184914[/attach]
[attach]1184915[/attach]
作者: mike1981 時間: 2011-5-19 00:04
Just online order yesterday, But already send to me today at 5:00pm. (In China)
I Just found that t ...
siusiu321 發表於 2011-5-19 00:02
下？
你個fd config勁咁多當然啦
不嬲最直接都係換speaker同amp
最直接反映表現
作者: genwch 時間: 2011-5-19 00:14
樓主用咩出OPTICAL SIGNAL比MD10呀?
樓主聽到個分別大唔大呀??
OPTICAL 同USB直出
作者: siusiu321 時間: 2011-5-19 00:35
樓主用咩出OPTICAL SIGNAL比MD10呀?
樓主聽到個分別大唔大呀??
OPTICAL 同USB直出
genwch 發表於 2011-5-19 00:14
Using Onboard Optical. It is more better than using USB. Can have more detail & layer. It is hard to say.
作者: genwch 時間: 2011-5-19 00:37
Using Onboard Optical. It is more better than using USB. Can have more detail & layer. It is hard ...
siusiu321 發表於 2011-5-19 00:35
死火喇
我裝完個USB DRIVER再加ASIO4ALL
已經...算好滿意O忝...
因為之前試過好似唔係好分得出個分別
CHING用咩歌聽出分別??
介紹聽聽得唔得
作者: siusiu321 時間: 2011-5-19 00:41
My overall setting. Not good...........
[attach]1184937[/attach]
作者: siusiu321 時間: 2011-5-19 00:42
Susan Wong & 蔡琴
作者: genwch 時間: 2011-5-19 00:53
Susan Wong & 蔡琴
siusiu321 發表於 2011-5-19 00:42
...等我搵日...認真去分多次先..
CHING, USB 同OPTICAL都係用44.1KHZ 試?!
用FOOBAR?!
作者: siusiu321 時間: 2011-5-19 00:59
USB & Optical are using 44.1KHz
foobar 2000, WASAPI 24bits
But the Wav file are rip by myself.
作者: genwch 時間: 2011-5-19 01:32
USB都用到24BIT??
我有問題O既...OTZ...
作者: siusiu321 時間: 2011-5-19 09:39
USB is using 16 bits. Optical are using 24Bits.