作者: jaxyan 時間: 2015-4-1 23:47 標題: RAS PI MODEL B新手一問
想問有無話咩SD CARD唔SUPPORT?
我用SANDISK EXTREME PLUS 64GB
但好似BOOT唔起
係咪個OS抄唔啱?
請指教
作者: fireeye 時間: 2015-4-1 23:54
想問有無話咩SD CARD唔SUPPORT?
我用SANDISK EXTREME PLUS 64GB
但好似BOOT唔起
係咪個OS抄唔啱?
請指教 ...
jaxyan 發表於 2015-4-1 23:47
你不如試下第個 image.同埋燒image落SD時選理MD5檢查。
作者: jaxyan 時間: 2015-4-1 23:59
回覆 2# fireeye
我就咁抄個NOOB落SD CARD渣?
我DESKTOP係WINDOWS 無 DD COMMAND用
作者: fireeye 時間: 2015-4-2 00:09
回覆 fireeye
我就咁抄個NOOB落SD CARD渣?
我DESKTOP係WINDOWS 無 DD COMMAND用
jaxyan 發表於 2015-4-1 23:59
我用第二䅜方法。用佢地介紹家燒咭程式將image檔寫落SD..
作者: jaxyan 時間: 2015-4-2 00:17
師兄可以介紹下？
作者: pl8888 時間: 2015-4-2 00:29
師兄可以介紹下？
jaxyan 發表於 2015-4-2 00:17
Win32 Disk Imager
http://sourceforge.net/projects/win32diskimager/
作者: polarhei 時間: 2015-4-2 09:47
本帖最後由 polarhei 於 2015-4-2 09:48 編輯
該型號最多支援32GB (SDHC)
作者: handsomepork 時間: 2015-4-2 11:03
http://elinux.org/RPi_SD_cards
作者: polarhei 時間: 2015-4-2 14:11
回覆 8# handsomepork
雖然實驗版,看過你版面後是支援SDXC, 不過仍然太新.
作者: fireeye 時間: 2015-4-2 14:56
隻野係support SDXC的．我用三叔64G咭都ok..
作者: domeso 時間: 2015-4-2 14:57
get a cheap Samsung EVO, all RPi my nodes are with them, all working well.
作者: fireeye 時間: 2015-4-2 15:03
handsomepork 發表於 2015-4-2 11:03
我搵到Ｄ comment關於我張三叔咭，睇來樓主張咭係有exFAT問題．．．
-------------------------------------
Appears that the Pi has difficulty booting a 64GiB SDXC card that's formatted for exFAT. This card will NOT work with default settings (1/23/2015, Model B+). Workaround: download a valid image file -- not NOOBS, it must be an image. Then, use a utility such as dd or Win32DiskImager to copy the image directly to your device. This forces a small enough FAT32 partition that the RasPi will be able to read and boot. Confirmed that the "Expand Filesystem" option for Raspian still works after reboot
作者: fireeye 時間: 2015-4-2 15:22
燒完張咭後要人肉加大返個ｆｉｌｅ ｓｙｓｔｅｍ。
http://www.raspberrypi.org/forums/viewtopic.php?f=51&t=45265
－－－－－－－－－－－－－－－－－
You could login using headless mode (headless mode means that you don't have a display connect and you login with ssh from any other system) and use these steps to expand your root partition and file system on a Raspberry Pi running Pedora (fedora remix):
- backup your system in case of a misstake!
- use "fdisk /dev/mmcblk0" to view your partitions.
- use "parted" to delete the partition and then recreate it but with a larger size. (don't worry, the data will remain)
- reboot to activate the partition changes.
- use "resize2fs /dev/mmclk0p2" to enlarge the root file system.
- use e2fsck -f /dev/mmcblk0p2 to perform a file system check.
- use "df -h" to check results.
--------------------------------------------
作者: domeso 時間: 2015-4-2 15:30
Why would you format it as exFat? just dd / win32image the image to the card and sudo rpi-config > expand FS to full size.
作者: jaxyan 時間: 2015-4-3 12:23
都係BOOT唔起
作者: jaxyan 時間: 2015-4-3 12:23
係咪隻USB差問題呢?
我LED燈有著
作者: jaxyan 時間: 2015-4-4 13:54
回覆 10# fireeye
呢點解呢?
師兄
我插電有著PWR 紅燈
ACT 綠燈
但就乜畫面都無?
作者: fireeye 時間: 2015-4-4 14:37
回覆 fireeye
呢點解呢?
師兄
我插電有著PWR 紅燈
ACT 綠燈
但就乜畫面都無? ...
jaxyan 發表於 2015-4-4 13:54
你睇睇network燈有無閃．睇睇router到有無派左IP出來．如果有就部機着左但出唔到顯示．試下SSH佢．．真係唔得就要換咭再試了．．．
作者: fireeye 時間: 2015-4-4 14:43
你個張係貴咭，如果唔support就可惜了！
作者: buffaloxxx 時間: 2015-4-4 20:02
我冇試過用64G sd boot 機
但我用windows format 32G sd (fat32) 會boot唔起
用SDFormatter 全format先ok
或者用相機format
作者: fireeye 時間: 2015-4-4 21:18
宜家三種可能，你張咭PI2認唔到．張咭boot sector 或入面boot loader花去．HDMI輸出炒左出唔到顯示．建議試下ssh佢或重燒咭．唔得用第張咭試可買張幾草野家平咭再試下！
作者: jaxyan 時間: 2015-4-5 22:16
好。試試