標題: 又平又型既車軨? [打印本頁]

---

作者: gn01119056    時間: 2018-12-27 11:29     標題: 又平又型既車軨?

本帖最後由 gn01119056 於 2018-12-27 14:30 編輯

想問下如果純粹想換車軨, 主要外型靚就得, 應該買咩?

BMW F10

假台仔軨或TB一定唔買

應該去邊度買? 邊度裝? 有無好介紹?

---

作者: nkc1989hkjc    時間: 2018-12-27 12:46

本帖最後由 nkc1989hkjc 於 2018-12-27 12:48 編輯

台仔鈴唔要,咁咪同原廠買囉,不過一定唔平,
鈴師傅/鈴博士 睇下
一係去原廠輪圈之友/香港呔鈴直銷 fb group睇.

---

作者: gn01119056    時間: 2018-12-27 12:51




    台仔軨無問題, 係唔想買假台仔軨

---

作者: PPLd    時間: 2018-12-27 13:23

本帖最後由 PPLd 於 2019-1-8 09:59 編輯



    Depends on how you think is cheap.
I got a set of brand new Enkei Made in Japan rims for my car.
HKD $18xx each x4 wheels.
They are only 6.76kg each.
Update: I checked with dealer and mine are 6.76kg not 7.1kg as i originally posted.

I think it is good price and light weight performance.
I suppose it is not as strong as forged but do OK for my car for 1/4 the price.
Last I checked, knock-offs also cost more than a thousand each la?

---

作者: gn01119056    時間: 2018-12-27 14:31




    $1824好平, how and where you get it?

---

作者: carcarli    時間: 2018-12-27 15:22

What is the size for only $1824 each PPLd CHing?

For BMW F10. 20 inch is perfect match i think.

---

作者: gn01119056    時間: 2018-12-27 17:18

我見TSW美國軨$3000/隻, 好唔好?

---

作者: pure_water    時間: 2018-12-27 19:10



$3000隻都唔平了，加多些都去到定做鍛鈴水平(非大牌子計)，要齊沙板就靚晒，可以輕過普通鈴，不過都是睇你budget幾多? 要買幾多吋先? 另外有冇換避震low低車身?

車鈴我就覺得越大就是越靚啦，但啲鈴和呔都會越來越貴(特別是呔)，而且馬力不夠仲會影響起歩能力和增加油耗

---

作者: PPLd    時間: 2018-12-27 19:39

回覆 5# gn01119056

I got my wheels from a reputable distributor of Enkei.
Cant afford the risk of getting knock offs.

---

作者: PPLd    時間: 2018-12-27 19:40



Sorry I cant afford a BMW F10 so cant comment.
The Enkei go onto my Subaru.

---

作者: PPLd    時間: 2018-12-27 19:41

本帖最後由 PPLd 於 2018-12-27 19:59 編輯


Tsw is an African company.
Most of their wheels are made in Africa or China.
I am not aware they hv production facilities in US?
Your $3000 is USA?

---

作者: gn01119056    時間: 2018-12-27 23:27

本帖最後由 gn01119056 於 2018-12-27 23:28 編輯



    They advertise as an US company, maybe just marketing

F10 is just cheap cheap 2nd hand

where did you get your enkei?

---

作者: gn01119056    時間: 2018-12-27 23:28




    香港渣車都唔唸住換太大, 起步太食油, 特別係F10

只要係想外型靚仔

---

作者: asian_xl    時間: 2018-12-28 00:48

我套大六19吋鈴行咗10萬公哩，去呔舖Check都話無𢯎無問題, 雙11買咗第四套，行得走得

---

作者: gn01119056    時間: 2018-12-28 10:12




    無事就無事, 有事就懶野

唔影響安全既野可以係淘寶買, 同命仔有關既就不了

---

作者: asian_xl    時間: 2018-12-28 14:02

呔一定買靚牌子，螺絲就買正廠，但我又未聽過爆鈴，除非你落場或撞車，一般貴價鈴金屬疲勞都有機會爆。依10年香港啲路咁差都無大問題，個人喜好。有人會話你揸寶馬做乜唔買鍛造鈴一樣。

---

作者: pure_water    時間: 2018-12-28 16:19



咁你可以試下INFORGED，19吋上網睇係$7600 一套，正廠台仔野都安心。你上網搵下吧

---

作者: PPLd    時間: 2019-1-2 12:42

本帖最後由 PPLd 於 2019-1-16 13:06 編輯


So it really depends on how much money YOU WANT to spend.
The Enkei RPF1 I bought seem for Japanese cars?
for BMW F10, I guess you need others?
I am not car expert so cant say for sure.

P.S.1:
Recently I also ordered a set of brand new OZ Racing for my other car.
They are 9.5kg each.
But they are about double the price of Enkei so I think they are not "cheap".
+ Eibach Pro-kit $12xx
+ EBC brake pads $10xx for all 4 corners.

I think it is good price.
A little bit money here and there, and transformed the car.
With low down and 9" wide wheels, car definitely look sporty to layman like me
The brake response is also greatly improved.
I suppose it is not as strong as forged + coilover but do OK for my car for 1/4 the price.
Once again please buy from authorized dealers because it is not worth to buy cheap knock-offs.

P.S.2:
You can see see some online photo for same model as my OZ and Enkei wheels:




P.S.3:
I received PM asking me where to buy.
I already said you can buy from authorized dealers.
Please I do not work for any shop and I will not advertise for them.

---

作者: HelloOcean    時間: 2019-1-15 18:37

提示: 作者被禁止或刪除 內容自動屏蔽

---

作者: stevechau    時間: 2019-1-16 10:10




只能夠講句, 真係有事果陣, 正廠定淘寶鈴都係死梗~
都見過唔少車友使左大錢換套靚既正廠鈴, 香港地行一年半車就話撞爆/淆左條鈴~
到頭來都係搵返台仔(咪即係淘寶), 起碼平平地再撞爆當換款都無咁赤~
但如果無信心既, 就唔好試喇, ENKEI/WEDSPORT果D鈴又唔算係貴到飛天~
p.s.其實唔少原裝正廠鈴都係大陸製, 你避得幾多丫

---

作者: gn01119056    時間: 2019-1-16 10:40




    你的神邏輯... 大陸製唔係問題, 真廠假廠先係問題

---

作者: asian_xl    時間: 2019-1-16 11:04

本帖最後由 asian_xl 於 2019-1-16 11:08 編輯

剎車碟我就唔敢用大陸製，鈴日常用好少會粉身碎骨

---

作者: pure_water    時間: 2019-1-16 11:30

本帖最後由 pure_water 於 2019-1-16 14:37 編輯


好明顯你好少揸車，香港啲路咁爛，老番鈴今日唔爆但都好快會爆，爆咗鈴有剎車都冇用啦，都唔知撞咗去邊，到時你仲有命都有排賠啦，保險見你用呢啲鈴一定諗辨法不賠償
   
睇下日本測試真假鈴:
https://myelantra.org/forum.php?mod=viewthread&tid=27990

---

作者: gn01119056    時間: 2019-1-16 14:13

其實重要件都係用原廠好

紙巾盒, 手機架就可以淘了

---

作者: stevechau    時間: 2019-1-16 15:30




咁你咪睇下搵唔搵到間真廠出黎囉, 肯搵下既可能比你搵到平靚正野呢~
正廠正常用可能無咁易爆, 但而家香港既路面......
比套正廠你都死, 原裝正廠被撞爆都唔係見得少~
所以質素上我已經唔係太排斥淘寶/大陸鈴, 反正坊間既台仔仿鈴個人睇法就9成都係淘寶源頭黎, 不過大陸搵鈴能夠搵好D就搵好D啦~
銀包鬆動D既, 咪堅台仔鈴囉......再鬆動D既, 咪架仔/外國鈴囉~
咁要窮買平價換下鈴款既, 大陸鈴都唔係差既~
其實你揸F10, 整套台仔M鈴咪得囉~

---

作者: gn01119056    時間: 2019-1-17 08:57




    F10我都係二手平野, 窮人而已

美國日本牌子好多都係大陸做, 但正廠QC點都好過假廠

香港有代理授權應該少些機會係假廠

正廠都會爆, 咁不如買假廠... 呢個咩邏輯

正廠出事機率點都細過假廠好多

無理由話飲澳洲奶粉都會有人死, 咁不如飲大陸奶粉, 點會咁計...

---

作者: stevechau    時間: 2019-1-17 10:27




首先呢, 我就無講過「正廠都會爆, 咁不如買假廠」呢個理論, 我就唔知你點解會演繹到咁啦
其次呢, 我就只係話, 其實好多正廠都係大陸造, 即係淘寶貨, 你避得幾多??
跟著呢, 就係所謂淘寶鈴/大陸鈴, 唔一定等如假野, 就算正廠正品你都可以係淘寶搵得到既
亦都所以我有話, 你咪去搵下有無正廠先囉, 反正你都搵開GA啦~
正如你話飲澳洲奶粉有人死, 不如飲大陸奶粉;
但我既講法係, 其實第二度都有正廠奶粉既, 唔係非代理引入就係假奶粉既, 甚至你買緊既澳洲奶粉其實都係大陸果間出既~
更甚有可能你搵到貨源, 係同代理同一間廠製造出黎但更優質更平價既奶粉都有可能, 唔使一開波就抹殺晒自己既可能性去捱貴野~
反正代理賣緊都好可能係同一貨源同一批貨, 咪睇你係咪想比代理食多浸, 等第時可能有事你搵到人發洩囉~
又反正係香港買到既台仔鈴, 如果唔係果幾個牌子, 都幾有可能係你心入面好介意既淘寶鈴, 甚至係假野黎~
但你買到果D正廠牌子, 又唔容易符合你對平既定義~

---

作者: gn01119056    時間: 2019-1-17 11:39

本帖最後由 gn01119056 於 2019-1-17 11:49 編輯



    明白, 但係我無咁既知識去分邊D係副廠(非假廠), 邊D係假廠

但香港代理就多數係正廠, 淘寶代理都可以係有問題

香港代理出左事, 香港都起碼有制度可跟, 整體可靠性點計都好些

淘寶買就完全自負, 唔知佢係真代理定假代理, 真廠定假廠, 就算咩都係真, 寄果個人又可以寄假野比你, 大陸點解買唔過, 就係因為咩環節都可以出事, 出左事又無人理你

香港代理就係收錢幫你做左QC, 有事會負責, 貴就係貴左係度, 作為一般無咩知識既平民, 會搵間合理價錢既授權代理(貴20%都值), 亦唔會去FB買

我明你咩意思, 即係買副廠, 識既話係又平又底玩, 唔識就要交學費, 或者交埋條命

---

作者: bei6266    時間: 2019-1-18 11:54

本帖最後由 bei6266 於 2019-1-18 11:55 編輯

買淘寶個d鈴,A.B.C.貨.不如用原裝鐵鈴好過啦.