Board logo

標題: [維修] 車輪異響問題 [打印本頁]

作者: love19901109    時間: 2017-6-16 11:02     標題: 車輪異響問題

小弟部錢七做完四輪定位後過灣有"各各"聲 , 但未做之前點快地下點難都無聲
請問會係咩情況多? 由其係高底位多特別響   有冇師兄有類似情況?
不約而同地前一部車都係咁  會唔會四輪定位步驟有問題影響?困擾左我好耐!!
作者: jeffery26hk    時間: 2017-6-16 11:10

回覆 1# love19901109

呔尺杯士機會高
   
作者: jeffery26hk    時間: 2017-6-16 11:14

睇埋魚蛋膠有無爛

作者: love19901109    時間: 2017-6-16 12:23

回覆 3# jeffery26hk
唔該晒!!  想問下度呔尺郁過會唔會整爛?  我唔想換完又度然後又整爛
作者: jeffery26hk    時間: 2017-6-16 14:09

回覆  jeffery26hk
唔該晒!!  想問下度呔尺郁過會唔會整爛?  我唔想換完又度然後又整爛 ...
love19901109 發表於 2017-6-16 12:23 PM



四輪定位 > Seems will not 整爛
度呔尺 > I am not sure
作者: jeffery26hk    時間: 2017-6-16 14:10

四輪定位流程由龐德講解和實際操作
作者: love19901109    時間: 2017-6-17 07:19

回覆 6# jeffery26hk
Thanks a lot
作者: pete    時間: 2017-6-17 15:56

You may check the bearing! If you hear the sound usually when to turn the steering wheel near to its limit, it related to the ball joint. However, if you hear it when you driving fast and a little steer, it may due to the wear of bearing of the wheel.
作者: lyh1993    時間: 2017-6-17 20:59

H車? 似波裝
作者: love19901109    時間: 2017-6-18 02:53

回覆 9# lyh1993
No Mazda   ,定位前乜聲都無  非常實在
舊車係H 但已換所有頭擔零件  後尾換左狗骨有好轉 但爛路依然輕微有聲
作者: love19901109    時間: 2017-6-18 03:02

回覆 8# pete
Bearing should be ok , the noise usually occur when diver through pothole or  bad road condition even straight road.
作者: lyh1993    時間: 2017-6-19 07:28

回覆  lyh1993
No Mazda   ,定位前乜聲都無  非常實在
舊車係H 但已換所有頭擔零件  後尾換左狗骨有好轉  ...
love19901109 發表於 2017-6-18 02:53 AM

搞過呔呎出事?

via HKEPC Reader
作者: love19901109    時間: 2017-6-19 12:55

回覆 12# lyh1993
我都唔知佢郁過D乜  因為佢搞果陣太熱我坐係房等   
但我肯定未做之前點行架車都無聲





歡迎光臨 電腦領域 HKEPC Hardware (https://h0.hkepc.com/forum/) Powered by Discuz! 7.2